Tool Guides / Finishing - Powder Coating Booth / Resources (#263) rev 2

Approvals needed: 2

Tool Guides / Finishing - Powder Coating Booth / Tool Tutorial (#264) rev 2

• tool_code = PDB

Approvals needed: 2

Tool Guides / Finishing - Powder Coating Booth / Manual (#265) rev 2

Approvals needed: 2

Tool Guides / Finishing - Powder Coating Booth / Member Notes (#266) rev 2

Approvals needed: 2

Tool Guides / 3D Printing - 3D Printers / Tool Tutorial (#421) rev 2

• tool_code = 3D1
• tool_code = 3D2
• tool_code = 3D3

Approvals needed: 2

Tool Guides / 3D Printing - 3D Printers / Resources (#423) rev 2

• status = incomplete

Approvals needed: 2

Tool Guides / 3D Printing - 3D Printers / Member Notes (#424) rev 2

Approvals needed: 2

Tool Guides / Air Tools - Air Compressor / Tool Tutorial (#425) rev 2

• status = incomplete
• tool_code = ARC

Approvals needed: 2

Tool Guides / Air Tools - Air Compressor / Manual(s) (#426) rev 2

Approvals needed: 1

Tool Guides / Air Tools - Air Compressor / Resources (#427) rev 2

Approvals needed: 2

Tool Guides / Air Tools - Air Compressor / Member Notes (#428) rev 2

Approvals needed: 2

Tool Guides / General Woodshop - Belt and Disc Sander / Manual(s) (#430) rev 2

Approvals needed: 2

Tool Guides / General Woodshop - Belt and Disc Sander / Resources (#431) rev 2

Approvals needed: 2

Tool Guides / General Woodshop - Belt and Disc Sander / Member Notes (#432) rev 2

Approvals needed: 2

Tool Guides / Forge - Forge / Tool Tutorial (#433) rev 2

• tool_code = FRG
• tool_code = FRG2
• tool_code = FRG3
• tool_code = PT1
• tool_code = PT2
• tool_code = PT3

Approvals needed: 2

Tool Guides / Forge - Forge / Manual(s) (#434) rev 2

Approvals needed: 2

Tool Guides / Forge - Forge / Resources (#435) rev 2

Approvals needed: 2

Tool Guides / Forge - Forge / Member Notes (#436) rev 2

Approvals needed: 2

Tool Guides / Graphics - Heat Press and Cap Press / Tool Tutorial (#437) rev 2

• tool_code = HPR
• tool_code = CHP

Approvals needed: 2

Tool Guides / Graphics - Heat Press and Cap Press / Manual(s) (#438) rev 2

Approvals needed: 2

Tool Guides / Graphics - Heat Press and Cap Press / Resources (#439) rev 2

Approvals needed: 2

Tool Guides / Graphics - Heat Press and Cap Press / Member Notes (#440) rev 2

Approvals needed: 2

Tool Guides / Textiles - Embroidery Machine / Tool Tutorial (#441) rev 2

• tool_code = CEM

Approvals needed: 2

Tool Guides / Textiles - Embroidery Machine / Manual(s) (#442) rev 2

Approvals needed: 2

Tool Guides / Textiles - Embroidery Machine / Resources (#443) rev 2

Approvals needed: 2

Tool Guides / Textiles - Embroidery Machine / Member Notes (#444) rev 2

Approvals needed: 2

Tool Guides / Machining - Tormach / Tool Tutorial (#445) rev 2

• tool_code = TMH

Approvals needed: 2

Tool Guides / Machining - Tormach / Manual(s) (#446) rev 2

Approvals needed: 2

Tool Guides / Machining - Tormach / Resources (#447) rev 2

Approvals needed: 2

Tool Guides / Machining - Tormach / Member Notes (#448) rev 2

Approvals needed: 2

Tool Guides / Welding & Plasma Cutting - CNC Plasma Cutter / Tool Tutorial (#449) rev 2

• tool_code = CPS

Approvals needed: 2

Tool Guides / Welding & Plasma Cutting - CNC Plasma Cutter / Manual(s) (#450) rev 2

Approvals needed: 2

Tool Guides / Welding & Plasma Cutting - CNC Plasma Cutter / Resources (#451) rev 2

Approvals needed: 2

Tool Guides / Welding & Plasma Cutting - CNC Plasma Cutter / Member Notes (#452) rev 2

Approvals needed: 2

Tool Guides / Woodshop - CNC Router / Tool Tutorial (#453) rev 2

• tool_code = CCR

Approvals needed: 2

Tool Guides / Woodshop - CNC Router / Manual(s) (#454) rev 2

Approvals needed: 2

Tool Guides / Woodshop - CNC Router / Resources (#455) rev 2

Approvals needed: 2

Tool Guides / Woodshop - CNC Router / Member Notes (#456) rev 2

Approvals needed: 2

Tool Guides / General Woodshop - Miter Saw / Manual(s) (#458) rev 2

Approvals needed: 2

Tool Guides / General Woodshop - Miter Saw / Resources (#459) rev 2

Approvals needed: 2

Tool Guides / General Woodshop - Miter Saw / Member Notes (#460) rev 2

Approvals needed: 2

Tool Guides / Millwork - Drum Sander / Tool Tutorial (#461) rev 2

• tool_code = DRS

Approvals needed: 2

Tool Guides / Millwork - Drum Sander / Manual(s) (#462) rev 2

Approvals needed: 2

Tool Guides / Millwork - Drum Sander / Resources (#463) rev 2

Approvals needed: 2

Tool Guides / Millwork - Drum Sander / Member Notes (#464) rev 2

Approvals needed: 2

Tool Guides / Graphics - Dye Sublimation Printer / Tool Tutorial (#465) rev 2

• tool_code = DSB

Approvals needed: 2

Tool Guides / Graphics - Dye Sublimation Printer / Manual(s) (#466) rev 2

Approvals needed: 2

Tool Guides / Graphics - Dye Sublimation Printer / Resources (#467) rev 2

Approvals needed: 2

Tool Guides / Graphics - Dye Sublimation Printer / Member Notes (#468) rev 2

Approvals needed: 2

Tool Guides / Electronics - Hot Air Rework Station / Tool Tutorial (#469) rev 2

• tool_code = HAS

Approvals needed: 2

Tool Guides / Electronics - Hot Air Rework Station / Manual(s) (#470) rev 2

Approvals needed: 2

Tool Guides / Electronics - Hot Air Rework Station / Resources (#471) rev 2

Approvals needed: 2

Tool Guides / Electronics - Hot Air Rework Station / Member Notes (#472) rev 2

Approvals needed: 2

Tool Guides / Air Tools - Brad Nailer / Tool Tutorial (#481) rev 2

• tool_code = BNL

Approvals needed: 2

Tool Guides / Air Tools - Brad Nailer / Manual(s) (#482) rev 2

Approvals needed: 2

Tool Guides / Air Tools - Brad Nailer / Resources (#483) rev 2

Approvals needed: 2

Tool Guides / Air Tools - Brad Nailer / Member Notes (#484) rev 2

Approvals needed: 2

Tool Guides / Air Tools - Crown Stapler / Tool Tutorial (#485) rev 2

• tool_code = NCS

Approvals needed: 2

Tool Guides / Air Tools - Crown Stapler / Manual(s) (#486) rev 2

Approvals needed: 2

Tool Guides / Air Tools - Crown Stapler / Resources (#487) rev 2

Approvals needed: 2

Tool Guides / Air Tools - Crown Stapler / Member Notes (#488) rev 2

Approvals needed: 2

Tool Guides / Air Tools - Finish Nailer / Tool Tutorial (#489) rev 2

• tool_code = FNL

Approvals needed: 2

Tool Guides / Air Tools - Finish Nailer / Manual(s) (#490) rev 2

Approvals needed: 2

Tool Guides / Air Tools - Finish Nailer / Resources (#491) rev 2

Approvals needed: 2

Tool Guides / Air Tools - Finish Nailer / Member Notes (#492) rev 2

Approvals needed: 2

Tool Guides / Jewelry - Jewelry Torch / Tool Tutorial (#497) rev 2

• tool_code = SLT

Approvals needed: 2

Tool Guides / Jewelry - Jewelry Torch / Manual(s) (#498) rev 2

Approvals needed: 2

Tool Guides / Jewelry - Jewelry Torch / Resources (#499) rev 2

Approvals needed: 2

Tool Guides / Jewelry - Jewelry Torch / Member Notes (#500) rev 2

Approvals needed: 2

Tool Guides / Jewelry - Kiln / Tool Tutorial (#501) rev 2

Approvals needed: 2

Tool Guides / Jewelry - Kiln / Manual(s) (#502) rev 2

Approvals needed: 2

Tool Guides / Jewelry - Kiln / Resources (#503) rev 2

Approvals needed: 2

Tool Guides / Jewelry - Kiln / Member Notes (#504) rev 2

Approvals needed: 2

Tool Guides / Millwork - Jointer / Tool Tutorial (#505) rev 2

• tool_code = JNT

Approvals needed: 2

Tool Guides / Millwork - Jointer / Manual(s) (#506) rev 2

Approvals needed: 2

Tool Guides / Millwork - Jointer / Resources (#507) rev 2

Approvals needed: 2

Tool Guides / Millwork - Jointer / Member Notes (#508) rev 2

Approvals needed: 2

Tool Guides / Laser - Rabbit Laser (1 & 2) / Tool Tutorial (#509) rev 2

• tool_code = LS1
• tool_code = LS2

Approvals needed: 2

Tool Guides / Laser - Rabbit Laser (1 & 2) / Manual(s) (#510) rev 2

Approvals needed: 2

Tool Guides / Laser - Rabbit Laser (1 & 2) / Resources (#511) rev 2

Approvals needed: 2

Tool Guides / Laser - Rabbit Laser (1 & 2) / Member Notes (#512) rev 2

Approvals needed: 2

Tool Guides / Jewelry - Tumbler / Tool Tutorial (#513) rev 2

• tool_code = TMB

Approvals needed: 2

Tool Guides / Jewelry - Tumbler / Manual(s) (#514) rev 2

Approvals needed: 2

Tool Guides / Jewelry - Tumbler / Resources (#515) rev 2

Approvals needed: 2

Tool Guides / Jewelry - Tumbler / Member Notes (#516) rev 2

Approvals needed: 2

Tool Guides / Industrial Metals - Horizontal Bandsaw / Tool Tutorial (#517) rev 2

• tool_code = HRB

Approvals needed: 2

Tool Guides / Industrial Metals - Horizontal Bandsaw / Manual(s) (#518) rev 2

Approvals needed: 2

Tool Guides / Industrial Metals - Horizontal Bandsaw / Resources (#519) rev 2

Approvals needed: 2

Tool Guides / Industrial Metals - Horizontal Bandsaw / Member Notes (#520) rev 2

Approvals needed: 2

Tool Guides / Machining - Manual Metal Lathe / Tool Tutorial (#521) rev 2

• tool_code = MML

Approvals needed: 2

Tool Guides / Machining - Manual Metal Lathe / Manual(s) (#522) rev 2

Approvals needed: 2

Tool Guides / Machining - Manual Metal Lathe / Resources (#523) rev 2

Approvals needed: 2

Tool Guides / Machining - Manual Metal Lathe / Member Notes (#524) rev 2

Approvals needed: 2

Tool Guides / Machining - Manual Mill / Tool Tutorial (#525) rev 2

• tool_code = MLL

Approvals needed: 2

Tool Guides / Machining - Manual Mill / Manual(s) (#526) rev 2

Approvals needed: 2

Tool Guides / Machining - Manual Mill / Resources (#527) rev 2

Approvals needed: 2

Tool Guides / Machining - Manual Mill / Member Notes (#528) rev 2

Approvals needed: 2

Tool Guides / Sheet Metals - Shrinker/Stretcher / Tool Tutorial (#529) rev 2

• tool_code = MSS

Approvals needed: 2

Tool Guides / Sheet Metals - Shrinker/Stretcher / Manual(s) (#530) rev 2

Approvals needed: 2

Tool Guides / Sheet Metals - Shrinker/Stretcher / Resources (#531) rev 2

Approvals needed: 2

Tool Guides / Sheet Metals - Shrinker/Stretcher / Member Notes (#532) rev 2

Approvals needed: 2

Tool Guides / General Metals - Bench Grinders (Steel & Aluminum) / Tool Tutorial (#533) rev 2

• tool_code = SBG
• tool_code = ABG

Approvals needed: 2

Tool Guides / General Metals - Bench Grinders (Steel & Aluminum) / Manual(s) (#534) rev 2

Approvals needed: 2

Tool Guides / General Metals - Bench Grinders (Steel & Aluminum) / Resources (#535) rev 2

Approvals needed: 2

Tool Guides / General Metals - Bench Grinders (Steel & Aluminum) / Member Notes (#536) rev 2

Approvals needed: 2

Tool Guides / General Metals - Disc Grinder / Tool Tutorial (#537) rev 2

• tool_code = GDD

Approvals needed: 2

Tool Guides / General Metals - Disc Grinder / Manual(s) (#538) rev 2

Approvals needed: 2

Tool Guides / General Metals - Disc Grinder / Resources (#539) rev 2

Approvals needed: 2

Tool Guides / General Metals - Disc Grinder / Member Notes (#540) rev 2

Approvals needed: 2

Tool Guides / Electronics - OtherMill / Tool Tutorial (#541) rev 2

• tool_code = MCM

Approvals needed: 2

Tool Guides / Electronics - OtherMill / Manual(s) (#542) rev 2

Approvals needed: 2

Tool Guides / Electronics - OtherMill / Resources (#543) rev 2

Approvals needed: 2

Tool Guides / Electronics - OtherMill / Member Notes (#544) rev 2

Approvals needed: 2

Tool Guides / Millwork - Planer / Tool Tutorial (#545) rev 2

• tool_code = PNR

Approvals needed: 2

Tool Guides / Millwork - Planer / Manual(s) (#546) rev 2

Approvals needed: 2

Tool Guides / Millwork - Planer / Resources (#547) rev 2

Approvals needed: 2

Tool Guides / Millwork - Planer / Member Notes (#548) rev 2

Approvals needed: 2

Tool Guides / Plastics - Injection Molder / Tool Tutorial (#549) rev 2

• tool_code = IJM

Approvals needed: 2

Tool Guides / Plastics - Injection Molder / Manual(s) (#550) rev 2

Approvals needed: 2

Tool Guides / Plastics - Injection Molder / Resources (#551) rev 2

Approvals needed: 2

Tool Guides / Plastics - Injection Molder / Member Notes (#552) rev 2

Approvals needed: 2

Tool Guides / Plastics - Plastic Shredder / Tool Tutorial (#553) rev 2

• tool_code = PPS

Approvals needed: 2

Tool Guides / Plastics - Plastic Shredder / Manual(s) (#554) rev 2

Approvals needed: 2

Tool Guides / Plastics - Plastic Shredder / Resources (#555) rev 2

Approvals needed: 2

Tool Guides / Plastics - Plastic Shredder / Member Notes (#556) rev 2

Approvals needed: 2

Tool Guides / General Woodshop - Router Table / Router Table Tool Tutorial (TODO merge) (#561) rev 2

• tool_code = RTB

Approvals needed: 2

Tool Guides / General Woodshop - Router Table / Manual(s) (#562) rev 2

Approvals needed: 2

Tool Guides / General Woodshop - Router Table / Resources (#563) rev 2

Approvals needed: 2

Tool Guides / General Woodshop - Router Table / Member Notes (#564) rev 2

Approvals needed: 2

Tool Guides / Textiles - Serger / Tool Tutorial (#569) rev 2

• tool_code = ISG

Approvals needed: 2

Tool Guides / Textiles - Serger / Manual(s) (#570) rev 2

Approvals needed: 2

Tool Guides / Textiles - Serger / Resources (#571) rev 2

Approvals needed: 2

Tool Guides / Textiles - Serger / Member Notes (#572) rev 2

Approvals needed: 2

Tool Guides / Textiles - Consumer Sewing Machine / Tool Tutorial (#573) rev 2

• status = incomplete
• tool_code = CSW

Approvals needed: 2

Tool Guides / Textiles - Consumer Sewing Machine / Manual(s) (#574) rev 2

Approvals needed: 2

Tool Guides / Textiles - Consumer Sewing Machine / Resources (#575) rev 2

Approvals needed: 2

Tool Guides / Textiles - Consumer Sewing Machine / Member Notes (#576) rev 2

Approvals needed: 2

Tool Guides / Textiles - Juki Straight Stitch / Tool Tutorial (#577) rev 2

• status = incomplete
• tool_code = ISS

Approvals needed: 2

Tool Guides / Textiles - Juki Straight Stitch / Manual(s) (#578) rev 2

Approvals needed: 2

Tool Guides / Textiles - Juki Straight Stitch / Resources (#579) rev 2

Approvals needed: 2

Tool Guides / Textiles - Juki Straight Stitch / Member Notes (#580) rev 2

Approvals needed: 2

Tool Guides / Textiles - Juki Walking Foot / Tool Tutorial (#581) rev 2

• status = incomplete
• tool_code = IWF

Approvals needed: 2

Tool Guides / Textiles - Juki Walking Foot / Manual(s) (#582) rev 2

Approvals needed: 2

Tool Guides / Textiles - Juki Walking Foot / Resources (#583) rev 2

Approvals needed: 2

Tool Guides / Textiles - Juki Walking Foot / Member Notes (#584) rev 2

Approvals needed: 2

Tool Guides / General Metals - Shop Press / Tool Tutorial (#585) rev 2

• tool_code = SHP

Approvals needed: 2

Tool Guides / General Metals - Shop Press / Manual(s) (#586) rev 2

Approvals needed: 2

Tool Guides / General Metals - Shop Press / Resources (#587) rev 2

Approvals needed: 2

Tool Guides / General Metals - Shop Press / Member Notes (#588) rev 2

Approvals needed: 2

Tool Guides / Industrial Metals - Surface Grinder / Tool Tutorial (#589) rev 2

• tool_code = SRG

Approvals needed: 2

Tool Guides / Industrial Metals - Surface Grinder / Manual(s) (#590) rev 2

Approvals needed: 2

Tool Guides / Industrial Metals - Surface Grinder / Resources (#591) rev 2

Approvals needed: 2

Tool Guides / Industrial Metals - Surface Grinder / Member Notes (#592) rev 2

Approvals needed: 2

Tool Guides / Welding & Plasma Cutting - TIG Welder / Manual(s) (#594) rev 2

Approvals needed: 2

Tool Guides / Welding & Plasma Cutting - TIG Welder / Resources (#595) rev 2

Approvals needed: 2

Tool Guides / Welding & Plasma Cutting - TIG Welder / Member Notes (#596) rev 2

Approvals needed: 2

Tool Guides / Woodshop - Wood Lathe / Tool Tutorial (#597) rev 2

• tool_code = WLH

Approvals needed: 2

Tool Guides / Woodshop - Wood Lathe / Manual(s) (#598) rev 2

Approvals needed: 2

Tool Guides / Woodshop - Wood Lathe / Resources (#599) rev 2

Approvals needed: 2

Tool Guides / Woodshop - Wood Lathe / Member Notes (#600) rev 2

Approvals needed: 2

Tool Guides / Electronics - Soldering Iron / Tool Tutorial (#610) rev 2

• tool_code = SDS

Approvals needed: 2

Tool Guides / Electronics - Soldering Iron / Manual(s) (#611) rev 2

Approvals needed: 2

Tool Guides / Electronics - Soldering Iron / Resources (#612) rev 2

Approvals needed: 2

Tool Guides / Electronics - Soldering Iron / Member Notes (#613) rev 2

Approvals needed: 2

Tool Guides / Finishing - Sandblaster / Manual(s) (#620) rev 2

Approvals needed: 2

Tool Guides / Finishing - Sandblaster / Resources (#621) rev 2

Approvals needed: 2

Tool Guides / Finishing - Sandblaster / Member Notes (#622) rev 2

Approvals needed: 2

Tool Guides / / Quick Views (#623) rev 2

Approvals needed: 2

Tool Guides / Electronics - Reflow Oven / Tool Tutorial (#624) rev 2

• tool_code = ERO

Approvals needed: 2

Tool Guides / Electronics - Reflow Oven / Manual(s) (#625) rev 2

Approvals needed: 2

Tool Guides / Electronics - Reflow Oven / Resources (#626) rev 2

Approvals needed: 2

Tool Guides / Electronics - Reflow Oven / Member Notes (#627) rev 2

Approvals needed: 2

Tool Guides / Finishing - Powder Coating Ovens / Tool Tutorial (#631) rev 2

• tool_code = LPC
• tool_code = SPD

Approvals needed: 2

Tool Guides / Finishing - Powder Coating Ovens / Manual(s) (#632) rev 2

Approvals needed: 2

Tool Guides / Finishing - Powder Coating Ovens / Resources (#633) rev 2

Approvals needed: 2

Tool Guides / Finishing - Powder Coating Ovens / Member Notes (#634) rev 2

Approvals needed: 2

Tool Guides / Industrial Metals - Ironworker / Manual(s) (#680) rev 2

Approvals needed: 2

Tool Guides / Industrial Metals - Ironworker / Member Notes (#681) rev 2

Approvals needed: 2

Tool Guides / Industrial Metals - Ironworker / Resources (#682) rev 2

Approvals needed: 2

Tool Guides / Industrial Metals - Ironworker / Tool Tutorial (#683) rev 2

• tool_code = IRN

Approvals needed: 2

Tool Guides / Industrial Metals - Cold Saw / Tool Tutorial (#684) rev 2

• tool_code = CLD

Approvals needed: 2

Tool Guides / Industrial Metals - Cold Saw / Manual(s) (#685) rev 2

Approvals needed: 2

Tool Guides / Industrial Metals - Cold Saw / Resources (#686) rev 2

Approvals needed: 2

Tool Guides / Industrial Metals - Cold Saw / Member Notes (#687) rev 2

Approvals needed: 2

Tool Guides / Laser - Rabbit Laser (1 & 2) / Materials (#694) rev 2

Approvals needed: 2

Tool Guides / Woodshop - Tool Grinder / Manuals (#736) rev 2

Approvals needed: 2

Tool Guides / General Metals - Vertical Bandsaw / Tool Tutorial (#741) rev 2

• tool_code = VMB

Approvals needed: 2

Tool Guides / General Metals - Vertical Bandsaw / Manual(s) (#742) rev 2

Approvals needed: 2

Tool Guides / General Metals - Vertical Bandsaw / Resources (#743) rev 2

Approvals needed: 2

Tool Guides / General Metals - Vertical Bandsaw / Member Notes (#744) rev 2

Approvals needed: 2

Tool Guides / General Metals - Vertical Bandsaw / Materials (#745) rev 2

Approvals needed: 2

Maintenance - Tech Ready / Storage / Check for missing tags on paid storage (#748) rev 2

• maint_task = Check for missing tags on paid storage
• maint_asana_section = Facilities Maintenance
• maint_freq_days = 7
• maint_ref = recYO6EKixhyRKuZj
• maint_level = tech_ready

Approvals needed: 1

Last approved: rev 3

Maintenance - Tech Ready / Safety / Check First Aid Kits for low levels of supply (#753) rev 2

• maint_task = Check First Aid Kits for low levels of supply
• maint_asana_section = Facilities Maintenance
• maint_freq_days = 45
• maint_ref = recZkmX8mXjhqPJus
• maint_level = tech_ready

Approvals needed: 1

Last approved: rev 1

Maintenance - Tech Ready / Safety / Flush Eye Wash Station (Monthly) (#755) rev 2

• maint_task = Flush Eye Wash Station (Monthly)
• maint_asana_section = Facilities Maintenance
• maint_freq_days = 30
• maint_ref = reccSjGUqLIjIjObk
• maint_level = tech_ready

Approvals needed: 1

Last approved: rev 1

Tool Guides / General Woodshop - Panel Saw / Manuals (#762) rev 2

• tool_code = PNL

Approvals needed: 2

Tool Guides / Machining - Pantograph / Tool Tutorial (#772) rev 2

• tool_code = PGM

Approvals needed: 2

Tool Guides / Forge - Belt Grinder / Manual(s) (#788) rev 2

Approvals needed: 2

Tool Guides / Forge - Belt Grinder / Resources (#789) rev 2

Approvals needed: 2

Tool Guides / Forge - Belt Grinder / Member Notes (#790) rev 2

Approvals needed: 2

Tool Guides / Woodshop - Pantorouter / Tool Tutorial (#798) rev 2

• tool_code = PRT

Approvals needed: 2

Tool Guides / Woodshop - Pantorouter / Manual(s) (#801) rev 2

Approvals needed: 2

Tool Guides / Woodshop - Pantorouter / Member Notes (#802) rev 2

Approvals needed: 2

Tool Guides / Woodshop - Pantorouter / Resources (#803) rev 2

Approvals needed: 2

Tool Guides / Laser - Trotec (3) / Community Laser Files (#811) rev 2

Approvals needed: 2

Tool Guides / / Conference room teleconferencing (#813) rev 2

• tool_code = CFR

Approvals needed: 2

Tool Guides / General Metals - Chop Saw / Manual(s) (#826) rev 2

Approvals needed: 2

Tool Guides / General Metals - Chop Saw / Member Notes (#827) rev 2

Approvals needed: 2

Tool Guides / General Metals - Chop Saw / Resources (#828) rev 2

Approvals needed: 2

Tool Guides / General Metals - Chop Saw / Tool Tutorial - Notes (#829) rev 2

Approvals needed: 2

Tool Guides / Welding & Plasma Cutting - MIG Welder / Manual(s) (#842) rev 2

Approvals needed: 2

Tool Guides / Welding & Plasma Cutting - MIG Welder / Member Notes (#843) rev 2

Approvals needed: 2

Tool Guides / Welding & Plasma Cutting - MIG Welder / Resources (#844) rev 2

Approvals needed: 2

Tool Guides / Woodshop - Tool Grinder / Tool Tutorial (#848) rev 2

Approvals needed: 2

Maintenance - Training Required / CNC Router / CNC Router Spoil Board Surfacing (#851) rev 2

• tool_code = CCR
• maint_level = training_required
• maint_freq_days = 30
• maint_task = CNC Router Spoil Board Surfacing
• maint_asana_section = CNC Router
• maint_ref = rec7RUz7muehIei7l

Approvals needed: 1

Last approved: rev 6

Maintenance - Training Required / Large Format Laser - Rabbit / Laser 1 & 2: Clean Lens and Mirror 3 (#854) rev 2

• tool_code = LS1
• maint_task = Laser 1 & 2: Clean Lens and Mirror 3
• maint_asana_section = Lasers
• maint_ref = recf0yuY5qb3S43CW
• maint_level = training_required
• maint_freq_days = 14

Approvals needed: 1

Last approved: rev 5

Maintenance - Tech Ready / Laser Cutter, Rabbit / Laser 1 & 2: clean honeycomb (#855) rev 2

• tool_code = LS1
• maint_task = Laser 1 & 2: clean honeycomb
• maint_asana_section = Lasers
• maint_ref = recJErJCZu2afpsYF
• maint_level = tech_ready
• maint_freq_days = 60

Approvals needed: 1

Last approved: rev 3

Maintenance - Tech Ready / Laser Cutter, Rabbit / Laser 1 & 2: Clean bed and underneath - NEEDS REVIEW (#856) rev 2

• tool_code = LS1
• maint_task = Laser 1 & 2: Clean Bed and underneath
• maint_asana_section = Lasers
• maint_ref = recUQQSkVw225B1TW
• maint_freq_days = 180
• maint_level = tech_ready

Approvals needed: 1

Tool Guides / General Metals - Chop Saw / Tool Tutorial (#858) rev 2

• tool_code = MCS

Approvals needed: 2

Tool Guides / Millwork - Resaw Bandsaw / Throat Plate File (#862) rev 2

Approvals needed: 2

Tool Guides / Woodshop - CNC Router / Work Holding, Clamps, and Jigs (#863) rev 2

Approvals needed: 2

Maintenance - Training Required / Dust Collector, Woodshop / Changing Dust Collector Filters (#865) rev 2

• tool_code = MDC
• maint_task = Change Dust Collector Filters
• maint_asana_section = Woodshop
• maint_ref = ohmygoditsfullofbees
• maint_level = training_required
• maint_freq_days = 60

Approvals needed: 1

Last approved: rev 4

Tool Guides / / Tool guide missing? (#873) rev 2

Approvals needed: 2

Tool Guides / Plastics - Plastic Dryer / Image and Data Dump For Plastic Dryer (#878) rev 2

Approvals needed: 2

Tool Guides / Plastics - Vacuum Former / Tool Tutorial (#897) rev 2

Approvals needed: 2

Tool Guides / Plastics - Vacuum Former / Manual(s) (#898) rev 2

Approvals needed: 2

Tool Guides / Plastics - Vacuum Former / Resources (#899) rev 2

Approvals needed: 2

Tool Guides / Plastics - Vacuum Former / Member Notes (#900) rev 2

Approvals needed: 2

Maintenance - Tech Ready / Lawnmower / Clean Lawnmower (#901) rev 2

• tool_code = LMR
• maint_task = Clean Lawnmower
• maint_asana_section = Facilities Maintenance
• maint_freq_days = 180
• maint_ref = rec0HvMD8sQNEWtxJ
• maint_level = tech_ready

Approvals needed: 1

Last approved: rev 1

Maintenance - Tech Ready / Miter Saw, Wood / Inspect and Clean Wood Miter Saw Blade (#902) rev 2

• tool_code = MTR
• maint_asana_section = Woodshop
• maint_ref = recncmSAEQyGUmqpX
• maint_freq_days = 30
• maint_task = Inspect and Clean Wood Miter Saw Blade
• maint_level = tech_ready

Approvals needed: 1

Last approved: rev 1

Maintenance - Training Required / Lathe, Wood / Wood Lathe - Deep Clean (#903) rev 2

• tool_code = WLH
• maint_level = training_required
• maint_freq_days = 90
• maint_task = Wood Lathe - Deep Clean
• maint_asana_section = Woodshop
• maint_ref = recHXfFmi7VPXozBA

Approvals needed: 1

Last approved: rev 1

Maintenance - Tech Ready / Cleanup / Dust sheet metals area (#905) rev 2

• tool_code = FAC
• maint_asana_section = Industrial & Sheet Metals
• maint_ref = recsKXzxNc4P93d2x
• maint_level = tech_ready
• maint_freq_days = 30
• maint_task = Dust sheet metals area

Approvals needed: 1

Last approved: rev 1

Maintenance - Tech Ready / Cleanup / Empty Shop Vacs & Clean Filters (#907) rev 2

• tool_code = FAC
• maint_freq_days = 14
• maint_task = Empty shop vacs & clean filters
• maint_asana_section = Facilities Maintenance
• maint_ref = rec1wTYBmeD2SGwYV
• maint_level = tech_ready

Approvals needed: 1

Last approved: rev 3

Maintenance - Tech Ready / Cleanup / Purge the scrap bins (#908) rev 2

• tool_code = FAC
• maint_level = tech_ready
• maint_freq_days = 14
• maint_task = Purge the scrap bins
• maint_asana_section = Facilities Maintenance
• maint_ref = recCmIfna9D44Ka69

Approvals needed: 1

Last approved: rev 2

Maintenance - Tech Ready / Safety / Clean welding helmets and jackets (#909) rev 2

• tool_code = MWD
• maint_asana_section = Welding
• maint_ref = recGffIn6eZ1sg4jp
• maint_level = tech_ready
• maint_freq_days = 21
• maint_task = Clean welding helmets and jackets

Approvals needed: 1

Last approved: rev 1

Maintenance - Tech Ready / Sandblaster / Empty Sandblast media separator (#910) rev 2

• tool_code = SBL
• maint_freq_days = 7
• maint_asana_section = Powder Coating & Sandblasting
• maint_task = Empty Sandblast media seperator
• maint_ref = recTNsp1QZQps4mRD
• maint_level = tech_ready

Approvals needed: 1

Last approved: rev 3

Maintenance - Tech Ready / Lathe, Wood / Wood Lathe - Monthly (#911) rev 2

• tool_code = WLH
• maint_level = tech_ready
• maint_freq_days = 30
• maint_task = Wood Lathe - Monthly
• maint_asana_section = Woodshop
• maint_ref = WLH

Approvals needed: 1

Last approved: rev 1

Maintenance - Tech Ready / Cleanup / Dust and Sweep Woodshop Area (#912) rev 2

• maint_freq_days = 3
• maint_task = Dust and Sweep Woodshop Area
• tool_code = FAC
• maint_asana_section = Woodshop
• maint_ref = recp66mUFVNfOZCmZ
• maint_level = tech_ready

Approvals needed: 1

Last approved: rev 1

Maintenance - Tech Ready / Cleanup / Verify Tool Tags (Physical & Digital) (#913) rev 2

• tool_code = FAC
• maint_asana_section = Miscellaneous
• maint_ref = receVQvJwEedmJBvf
• maint_level = tech_ready
• maint_freq_days = 7
• maint_task = Verify tool tags (physical & digital)

Approvals needed: 1

Last approved: rev 1

Maintenance - Tech Ready / Pedestal Grinders, Metal / Pedestal Grinder Maintenance (Weekly) (#914) rev 2

• tool_code = SBG
• maint_asana_section = General Metals
• maint_ref = recJQBD5nujJ4vGLJ
• maint_level = tech_ready
• maint_freq_days = 7
• maint_task = Pedestal Grinder Maintenance (Weekly)

Approvals needed: 1

Last approved: rev 1

Maintenance - Tech Ready / Cleanup / Dust and Sweep Jewelry Area (#915) rev 2

• tool_code = FAC
• maint_asana_section = Jewelry
• maint_ref = recpncFL2U8s6VSr7
• maint_level = tech_ready
• maint_freq_days = 7
• maint_task = Dust and Sweep Jewelry Area

Approvals needed: 1

Last approved: rev 1

Maintenance - Tech Ready / Cleanup / Dust and Sweep Forge Area (#916) rev 2

• tool_code = FRG
• maint_freq_days = 7
• maint_task = Dust and Sweep Forge Area
• maint_asana_section = Forge
• maint_ref = recwdpx6Je14RC9eE
• maint_level = tech_ready

Approvals needed: 1

Last approved: rev 1

Maintenance - Tech Ready / Cleanup / Dust and Sweep Studio Area (#918) rev 2

• tool_code = FAC
• maint_asana_section = Facilities Maintenance
• maint_ref = recBF26z7cHvHOe3h
• maint_level = tech_ready
• maint_freq_days = 3
• maint_task = Dust and Sweep Studio Area

Approvals needed: 1

Last approved: rev 1

Maintenance - Tech Ready / Cleanup / Empty leak catcher in custodial room (#919) rev 2

• tool_code = FAC
• maint_ref = rec10gqso7XvtfC3Q
• maint_level = tech_ready
• maint_freq_days = 7
• maint_task = Empty leak catcher in custodial room
• maint_asana_section = Facilities Maintenance

Approvals needed: 1

Last approved: rev 1

Maintenance - Tech Ready / Cleanup / Clean front desk area and shelves (#920) rev 2

• maint_ref = recAop95ivLXRJq7M
• tool_code = FAC
• maint_level = tech_ready
• maint_freq_days = 9
• maint_task = Clean front desk area and shelves
• maint_asana_section = Facilities Maintenance

Approvals needed: 1

Last approved: rev 1

Maintenance - Tech Ready / Cleanup / Clean Popcorn Maker (#921) rev 2

• tool_code = FAC
• maint_freq_days = 21
• maint_task = Clean Popcorn Maker
• maint_asana_section = Facilities Maintenance
• maint_ref = rec2zujXMBm6dRXj3
• maint_level = tech_ready

Approvals needed: 1

Last approved: rev 2

Maintenance - Tech Ready / Cleanup / Dust and Sweep Metals Area (#922) rev 2

• tool_code = FAC
• maint_level = tech_ready
• maint_freq_days = 7
• maint_task = Dust and Sweep Metals Area
• maint_asana_section = General Metals
• maint_ref = recqT6YUgHXBmqmGE

Approvals needed: 1

Last approved: rev 1

Maintenance - Tech Ready / Safety / Clean/sanitize safety glasses & hearing protection (#925) rev 2

• tool_code = FAC
• maint_level = tech_ready
• maint_freq_days = 7
• maint_task = Clean/sanitize safety glasses & hearing protection
• maint_asana_section = Facilities Maintenance
• maint_ref = recuOoGUXtiPpmJBw

Approvals needed: 1

Last approved: rev 1

Maintenance - Tech Ready / Cleanup / Deep clean coffee maker (#926) rev 2

• tool_code = FAC
• maint_ref = receFWiiIY4fdfz73
• maint_level = tech_ready
• maint_freq_days = 180
• maint_task = Deep clean coffee maker
• maint_asana_section = Facilities Maintenance

Approvals needed: 1

Last approved: rev 1

Maintenance - Tech Ready / Jointer / Jointer Maintenance - Weekly (#927) rev 2

• tool_code = JNT
• maint_asana_section = Woodshop
• maint_ref = recCm6eI9ag2LkLkJ
• maint_level = tech_ready
• maint_freq_days = 7
• maint_task = Jointer Maintenance - Weekly

Approvals needed: 1

Last approved: rev 1

Maintenance - Tech Ready / Powder Coating Booth / Powder Coating - Clean out hooks & wires (#928) rev 2

• tool_code = PDB
• maint_asana_section = Powder Coating & Sandblasting
• maint_ref = rec4BfCAqLWQmIf77
• maint_level = tech_ready
• maint_freq_days = 60
• maint_task = Powder Coating - Clean out hooks & wires

Approvals needed: 1

Last approved: rev 1

Maintenance - Tech Ready / Pedestal Grinders, Metal / Pedestal grinder - cycle the media separator (#929) rev 2

• tool_code = SBG
• maint_freq_days = 7
• maint_task = Pedestal grinder - cycle the media separator
• maint_asana_section = General Metals
• maint_ref = rec4vWdB546s82WtB
• maint_level = tech_ready

Approvals needed: 1

Last approved: rev 1

Maintenance - Tech Ready / Cleanup / Lubricate door hinges (#930) rev 2

• tool_code = FAC
• maint_asana_section = Facilities Maintenance
• maint_ref = rec6k4bVZHRSwMVlN
• maint_level = tech_ready
• maint_freq_days = 365
• maint_task = Lubricate door hinges

Approvals needed: 1

Last approved: rev 1

Maintenance - Tech Ready / Cleanup / Powder Coating - Sweep and Check Hoses (#932) rev 2

• tool_code = PDB
• maint_freq_days = 14
• maint_task = Powder Coating - Sweep and Check Hoses
• maint_asana_section = Powder Coating & Sandblasting
• maint_ref = recIgcJIAU0nmZhEh
• maint_level = tech_ready

Approvals needed: 1

Last approved: rev 1

Maintenance - Tech Ready / Security / Update Wyze camera firmwares and adjust positioning (#933) rev 2

• tool_code = CAM
• maint_level = tech_ready
• maint_freq_days = 30
• maint_task = Update Wyze camera firmwares and adjust positioning
• maint_asana_section = Web & Software
• maint_ref = recJft4iXjcrEwVlS

Approvals needed: 1

Last approved: rev 1

Maintenance - Tech Ready / Powder Coating Booth / Powder Coating - Deep clean (#934) rev 2

• tool_code = PDB
• maint_level = tech_ready
• maint_freq_days = 365
• maint_task = Powder Coating - Deep clean
• maint_asana_section = Powder Coating & Sandblasting
• maint_ref = recMP9xc410YukiYY

Approvals needed: 1

Last approved: rev 1

Maintenance - Tech Ready / CNC Router / CNC router dust collector - check interface between filter and bag (#936) rev 2

• tool_code = CCR
• maint_task = CNC router dust collector - check interface between filter and bag
• maint_asana_section = CNC Router
• maint_ref = recTpvaEJyjlZgVIX
• maint_level = tech_ready
• maint_freq_days = 30

Approvals needed: 1

Last approved: rev 1

Maintenance - Tech Ready / Cleanup / Clean out overhead air filters in woodshop (#937) rev 2

• tool_code = FAC
• maint_ref = recTz4hQMdurWGVNm
• maint_level = tech_ready
• maint_freq_days = 30
• maint_task = Clean out overhead air filters in woodshop
• maint_asana_section = Facilities Maintenance

Approvals needed: 1

Last approved: rev 1

Maintenance - Tech Ready / Downdraft Table / Downdraft Table Monthly Maintenance (#938) rev 2

• tool_code = DFT
• maint_freq_days = 30
• maint_task = Downdraft Table Monthly Maintenance
• maint_asana_section = Woodshop
• maint_ref = recXiULPRFB8MCLFf
• maint_level = tech_ready

Approvals needed: 1

Last approved: rev 1

Maintenance - Tech Ready / Cleanup / Clean wash tub and water fountain (#939) rev 2

• tool_code = FAC
• maint_freq_days = 60
• maint_task = Clean wash tub and water fountain
• maint_asana_section = Facilities Maintenance
• maint_ref = recZNyGirmDDTCX3g
• maint_level = tech_ready

Approvals needed: 1

Last approved: rev 1

Maintenance - Tech Ready / Pedestal Grinders, Metal / Empty pedestal grinder media seperator (#940) rev 2

• tool_code = SBG
• maint_freq_days = 180
• maint_task = Empty pedestal grinder media seperator
• maint_asana_section = General Metals
• maint_ref = recbDx9YHNCS7vrRt
• maint_level = tech_ready

Approvals needed: 1

Last approved: rev 1

Maintenance - Tech Ready / Cleanup / Clean the water pitcher (#941) rev 2

• tool_code = FAC
• maint_freq_days = 14
• maint_task = Clean the water pitcher
• maint_asana_section = Miscellaneous
• maint_ref = recdBQw8LStFpOb2p
• maint_level = tech_ready

Approvals needed: 1

Last approved: rev 1

Maintenance - Tech Ready / Jointer / Jointer Maintenance - Monthly (#942) rev 2

• tool_code = JNT
• maint_level = tech_ready
• maint_freq_days = 30
• maint_task = Jointer Maintenance - Monthly
• maint_asana_section = Woodshop
• maint_ref = recdRlatLtAHlwgmT

Approvals needed: 1

Last approved: rev 2

Maintenance - Tech Ready / Miter Saw, Wood / Clean Miter Saw (#943) rev 2

• tool_code = MTR
• maint_asana_section = Woodshop
• maint_ref = rece8sN2BWhyjEza4
• maint_level = tech_ready
• maint_freq_days = 60
• maint_task = Clean Miter Saw

Approvals needed: 1

Last approved: rev 2

Maintenance - Tech Ready / Safety / Welding fume extractor - check filter (#944) rev 2

• tool_code = PNR
• maint_asana_section = Welding
• maint_ref = recgUmx0xIODuTESJ
• maint_level = tech_ready
• maint_freq_days = 180
• maint_task = Welding fume extractor - check filter

Approvals needed: 1

Last approved: rev 1

Maintenance - Tech Ready / Cleanup / Clean Computer Lab and Conference Room (#945) rev 2

• tool_code = CFR
• maint_level = tech_ready
• maint_freq_days = 14
• maint_task = Clean Computer Lab and Conference Room
• maint_asana_section = Facilities Maintenance
• maint_ref = recgh7rLnduO2Ek3m

Approvals needed: 1

Last approved: rev 1

Maintenance - Tech Ready / Dye Sublimation Printer / Check ink levels on dye sub printer (#946) rev 2

• tool_code = DSB
• maint_level = tech_ready
• maint_freq_days = 30
• maint_task = Check ink levels on dye sub printer
• maint_asana_section = Graphics
• maint_ref = rech07Gvq2tAK5d2Y

Approvals needed: 1

Last approved: rev 1

Maintenance - Tech Ready / CNC Metal Mill (Tormach) / Deep Clean Tormach CNC (#947) rev 2

• tool_code = TMH
• maint_asana_section = Machine Shop
• maint_ref = recrF56GkoNgufC5h
• maint_level = tech_ready
• maint_freq_days = 90
• maint_task = Deep Clean Tormach CNC

Approvals needed: 1

Last approved: rev 1

Maintenance - Tech Ready / Safety / Test emergency lighting (#948) rev 2

• tool_code = FAC
• maint_level = tech_ready
• maint_freq_days = 365
• maint_task = Test emergency lighting
• maint_asana_section = Facilities Maintenance
• maint_ref = recxPZGm8B0JlucNX

Approvals needed: 1

Last approved: rev 1

Maintenance - Training Required / Planer / Planer Maintenance (Monthly) (#949) rev 2

• tool_code = PNR
• maint_freq_days = 30
• maint_task = Planer Maintenance (Monthly)
• maint_asana_section = Woodshop
• maint_ref = recAbsZka5W3fYz1m
• maint_level = training_required

Approvals needed: 1

Last approved: rev 3

Maintenance - Training Required / Large Format Laser - Rabbit / Laser 1 & 2: Clean Mirrors 1 & 2 and Rails (#950) rev 2

• tool_code = LS1
• maint_freq_days = 60
• maint_task = Laser 1 & 2: Clean Mirrors 1 & 2 and Rails
• maint_asana_section = Lasers
• maint_ref = recFNuLqdwc0YTamx
• maint_level = training_required

Approvals needed: 1

Last approved: rev 1

Maintenance - Training Required / CNC Router / CNC router dust collector - deep clean (#952) rev 2

• tool_code = CCR
• maint_freq_days = 180
• maint_task = CNC router dust collector - deep clean
• maint_asana_section = CNC Router
• maint_ref = recQJbhqAKMIIDbxX
• maint_level = training_required

Approvals needed: 1

Last approved: rev 1

Maintenance - Training Required / Band Saw, Metal, Vertical / Vertical Metal Bandsaw - Monthly (#953) rev 2

• tool_code = VMB
• maint_freq_days = 30
• maint_task = Vertical Metal Bandsaw - Monthly
• maint_asana_section = General Metals
• maint_ref = recYuBczUhJnNipkH
• maint_level = training_required

Approvals needed: 1

Last approved: rev 1

Maintenance - Training Required / Pedestal Grinders / Inspect and dress the aluminum grinder wheel (#954) rev 2

• tool_code = ABG
• maint_freq_days = 14
• maint_task = Inspect and dress the aluminum grinder wheel
• maint_asana_section = General Metals
• maint_ref = recZQPCJlBDSIYBeJ
• maint_level = training_required

Approvals needed: 1

Last approved: rev 4

Maintenance - Training Required / TIG Welder / Inspect and dress the tungsten grinder (#956) rev 2

• tool_code = TWD
• maint_freq_days = 90
• maint_task = Inspect and dress the tungsten grinder
• maint_asana_section = Welding
• maint_ref = recbN1ENz3utdFnsq
• maint_level = training_required

Approvals needed: 1

Last approved: rev 1

Maintenance - Training Required / CNC Router / Grease Bearings & check tension on CNC Router (#957) rev 2

• tool_code = CCR
• maint_asana_section = CNC Router
• maint_ref = recnUqg0jMIafhLHQ
• maint_level = training_required
• maint_freq_days = 60
• maint_task = Grease Bearings & check tension on CNC Router

Approvals needed: 1

Last approved: rev 3

Maintenance - Training Required / CNC Plasma / Grease Bearings & Adjust Tension on CNC Plasma (#958) rev 2

• tool_code = CPS
• maint_asana_section = CNC Plasma
• maint_ref = recnzdKCob3E3J3tZ
• maint_level = training_required
• maint_freq_days = 90
• maint_task = Grease Bearings on CNC Plasma

Approvals needed: 1

Last approved: rev 2

Maintenance - Admin Required / Storage / Check for consistency with storage tags and Square storage subscriptions (#960) rev 2

• tool_code = FAC
• maint_freq_days = 30
• maint_task = Check for consistency with storage tags and Square storage subscriptions
• maint_asana_section = Facilities Maintenance
• maint_ref = rec7dme5hnUxRsEX9
• maint_level = admin_required

Approvals needed: 1

Last approved: rev 1

Maintenance - Admin Required / Security / Audit August Lock Access (#961) rev 2

• tool_code = FAC
• maint_level = admin_required
• maint_freq_days = 90
• maint_task = Audit August Lock Access
• maint_asana_section = Facilities Maintenance
• maint_ref = rec99cynZ9VGSQyEe

Approvals needed: 1

Last approved: rev 1

Maintenance - Admin Required / Workstation PCs / Perform updates on all computers (#965) rev 2

• tool_code = WEB
• maint_level = admin_required
• maint_freq_days = 90
• maint_task = Perform updates on all computers
• maint_asana_section = Facilities Maintenance
• maint_ref = recbBhpyrdE75u0LL

Approvals needed: 1

Last approved: rev 1

Maintenance - Admin Required / Storage / Organize Protohaven Project Materials (#966) rev 2

• tool_code = FAC
• maint_level = admin_required
• maint_freq_days = 180
• maint_task = Organize Protohaven project materials
• maint_asana_section = Facilities Maintenance
• maint_ref = recd9SWXgp1YiYsQS

Approvals needed: 1

Last approved: rev 1

Maintenance - Admin Required / Workstation PCs / Clean interiors of PCs (#968) rev 2

• tool_code = FAC
• maint_freq_days = 90
• maint_task = Clean interiors of PCs
• maint_asana_section = Facilities Maintenance
• maint_ref = recjsg8jtnKbBkv8M
• maint_level = admin_required

Approvals needed: 1

Last approved: rev 1

Maintenance - Admin Required / Air Compressor / REVIEW NEEDED - Air Compressor Maintenance (Monthly) (#972) rev 2

• tool_code = ARC
• maint_freq_days = 30
• maint_task = Air Compressor Maintenance (Monthly)
• maint_ref = rec162QGoLVv9vQiJ
• maint_asana_section = Facilities Maintenance
• maint_level = admin_required

Approvals needed: 1

Maintenance - Admin Required / Miter Saw, Wood / REVIEW NEEDED - Miter Saw - Inspect and Replace Motor Brushes (#973) rev 2

• tool_code = MTR
• maint_asana_section = Woodshop
• maint_ref = recAeDjghGAVlUUBC
• maint_level = admin_required
• maint_freq_days = 180
• maint_task = Miter Saw - Inspect and Replace Motor Brushes

Approvals needed: 1

Maintenance - Admin Required / Laser, Rabbit / REVIEW NEEDED - Laser 1 & 2: Clean Output Coupling Lens (#974) rev 2

• tool_code = LS2
• maint_level = admin_required
• maint_freq_days = 180
• maint_task = Laser 1 & 2: Clean Output Coupling Lens
• maint_asana_section = Lasers
• maint_ref = recBfOtIWcafRh38V

Approvals needed: 1

Maintenance - Admin Required / Drum Sander / REVIEW NEEDED - Drum Sander - Inspect and Replace Motor Brushes (#975) rev 2

• tool_code = DRS
• maint_freq_days = 180
• maint_task = Drum Sander - Inspect and Replace Motor Brushes
• maint_asana_section = Woodshop
• maint_ref = recSMWa12HQKIOe9D
• maint_level = admin_required

Approvals needed: 1

Maintenance - Admin Required / Powder Coating Ovens / REVIEW NEEDED - Powder Oven Annual Servicing (#976) rev 2

• tool_code = LPC
• maint_freq_days = 365
• maint_task = Powder Oven Annual Servicing
• maint_asana_section = Powder Coating & Sandblasting
• maint_ref = recVp79uA6X7D5eA3
• maint_level = admin_required

Approvals needed: 1

Maintenance - Training Required / CNC Plasma / Deep clean the CNC plasma water table (#977) rev 2

• tool_code = CPS
• maint_level = training_required
• maint_task = Deep clean the CNC plasma water table
• maint_freq_days = 30
• maint_asana_section = CNC Plasma
• maint_ref = recbtcpPLf0B1mbIp

Approvals needed: 1

Last approved: rev 6

Maintenance - Tech Ready / Security / Check Keybox Battery (#979) rev 2

• maint_freq_days = 60
• maint_task = Check keybox battery
• maint_asana_section = Facilities Maintenance
• maint_ref = keybox-battery
• maint_level = tech_ready

Approvals needed: 1

Last approved: rev 2

Maintenance - Training Required / Juki Serger MO 6700 / Maintenance Resources (#981) rev 2

• tool_code = ISG
• maint_level = training_required
• maint_freq_days = 30

Approvals needed: 1

Maintenance - Training Required / Juki Straight Stitch DDL8700 / Cleaning and oiling (#983) rev 2

• tool_code = ISS
• maint_freq_days =
• maint_level = training_required

Approvals needed: 1

Maintenance - Tech Ready / Slip Roll, Sheet Metal / Oil slip roll rollers (#984) rev 2

• tool_code = ESR
• maint_freq_days = 90
• maint_task = Oil the slip roller
• maint_asana_section = Industrial & Sheet Metals
• maint_ref = slip-roller-oiling
• maint_level = tech_ready

Approvals needed: 1

Last approved: rev 3

Maintenance - Tech Ready / / Maintenance Task Automation - For New Tasks, Start Here! (#985) rev 2

• maint_level =

Approvals needed: 1

Tool Guides / Forge - Belt Grinder / Tool Tutorial (#995) rev 2

Approvals needed: 2

Tool Guides / Measuring - Surface Plate / Tool Tutorial (#997) rev 2

Approvals needed: 2

Tool Guides / Measuring - Hardness Tester / Tool Tutorial (#998) rev 2

Approvals needed: 1

Tool Guides / Welding & Plasma Cutting - CNC Plasma Cutter / Filling and Draining the Plasma Table (#1006) rev 2

Approvals needed: 2

Tool Guides / General Woodshop - Table Saw / Manual(s) (#1014) rev 2

Approvals needed: 2

Tool Guides / General Woodshop - Table Saw / Resources (#1015) rev 2

Approvals needed: 2

Tool Guides / General Woodshop - Table Saw / Member Notes (#1016) rev 2

Approvals needed: 2

Tool Guides / Electronics - Digital Microscope / Tool Tutorial (#1017) rev 2

Approvals needed: 2

Tool Guides / Electronics - Digital Microscope / Manual(s) (#1018) rev 2

Approvals needed: 2

Tool Guides / Electronics - Digital Microscope / Resources (#1019) rev 2

Approvals needed: 2

Tool Guides / Electronics - Digital Microscope / Member Notes (#1021) rev 2

Approvals needed: 2

Tool Guides / Forge - Forge / History (#1031) rev 2

Approvals needed: 2

Maintenance - Tech Ready / Facilities & Outside / Magnet roller the parking lot (#1032) rev 2

• maint_level = tech_ready
• maint_asana_section = Facilities Maintenance
• maint_ref = magrollparkinglot
• maint_freq_days = 30
• maint_task = Run the magnet roller across the parking lot

Approvals needed: 1

Last approved: rev 4

Tool Guides / Measuring - Hardness Tester / Manual(s) (#1048) rev 2

Approvals needed: 2

Tool Guides / Measuring - Hardness Tester / Resources (#1049) rev 2

Approvals needed: 2

Tool Guides / Measuring - Hardness Tester / Member Notes (#1050) rev 2

Approvals needed: 2

Tool Guides / Machining - Pantograph / Resources For Pantograph (#1084) rev 2

Approvals needed: 2

Tool Guides / Machining - Pantograph / Drive Belt (#1089) rev 2

Approvals needed: 2

Tool Guides / Machining - Manual Metal Lathe / Supporting Long Stock (#1107) rev 2

Approvals needed: 2

Tool Guides / Laser - Trotec (3) / Trotec manuals (#1115) rev 2

Approvals needed: 2

Tool Guides / Laser - Trotec (3) / Trotec Tool Guide - Flat Cutting and Engraving (#1116) rev 2

Approvals needed: 2

Tool Guides / Laser - Trotec (3) / Trotec Rotary Tool Guide (#1117) rev 2

Approvals needed: 2

Tool Guides / Machining - Pantograph / Manuals (#1124) rev 2

Approvals needed: 2

Maintenance - Training Required / Welding Tables / 60 Day Welding Table Maintenance (#1154) rev 2

• tool_code = MAB
• maint_freq_days = 60
• maint_task = 60 Day Welding Table Maintenance
• maint_asana_section = Welding
• maint_ref = iusfhrugvh
• maint_level = training_required

Approvals needed: 1

Tool Guides / General Woodshop - Spindle Sander / Spindle Sander Tool Tutorial (#1166) rev 2

Approvals needed: 2

Tool Guides / General Woodshop - Belt and Disc Sander / Belt and Disc Sander Tool Tutorial (#1167) rev 2

Approvals needed: 2

Tool Guides / General Woodshop - Miter Saw / Miter Saw Tool Tutorial (#1168) rev 2

Approvals needed: 2

Tool Guides / General Woodshop - Bandsaw / Woodshop Band Saw Tool Tutorial (#1169) rev 2

Approvals needed: 2

Tool Guides / General Woodshop - Scroll Saw / Scroll Saw Tool Tutorial (#1172) rev 2

Approvals needed: 2

Tool Guides / General Woodshop - Table Saw / Table Saw Tool Tutorial (#1174) rev 2

Approvals needed: 2

Tool Guides / General Woodshop - Drill Press / Woodshop Drill Press Tool Tutorial (#1175) rev 2

Approvals needed: 2

Tool Guides / Millwork - Resaw Bandsaw / Resaw Bandsaw Tool Tutorial (#1181) rev 2

Approvals needed: 2

Tool Guides / General Woodshop - Router Table / Router Table Tool Tutorial (#1182) rev 2

Approvals needed: 2

Tool Guides / Welding & Plasma Cutting - TIG Welder / TIG Welder Tool Tutorial (#1185) rev 2

Approvals needed: 2

Tool Guides / / Tool Guide Template (#1187) rev 2

Approvals needed: 2

Tool Guides / Welding & Plasma Cutting - MIG Welder / MIG Welder Tool Tutorial (#1188) rev 2

Approvals needed: 2

Tool Guides / General Woodshop - Downdraft Table / Manual(s) (#1203) rev 2

Approvals needed: 2

Tool Guides / General Woodshop - Spindle Sander / Manual(s) (#1204) rev 2

Approvals needed: 2

Tool Guides / Finishing - Sandblaster / Sandblaster Tool Tutorial (#1232) rev 2

Approvals needed: 2

Tool Guides / Woodshop - Mortiser / Manuals (#1245) rev 2

Approvals needed: 2

Tool Guides / Graphics - Cold Laminator / Cold Laminator (#1274) rev 2

Approvals needed: 2

Maintenance - Tech Ready / Facilities & Outside / Front Door August Lock Batteries (#1326) rev 2

• tool_code = FAC
• maint_freq_days = 270
• maint_task = Front Door August Lock Batteries
• maint_asana_section = Facilities Maintenance
• maint_ref = waoieuhgaipuehrao;j8
• maint_level = tech_ready

Approvals needed: 1

Last approved: rev 3

Tool Guides / Welding & Plasma Cutting - Manual Plasma Cutter / Manual(s) (#1335) rev 2

Approvals needed: 2

Tool Guides / Welding & Plasma Cutting - Manual Plasma Cutter / Member Notes (#1336) rev 2

Approvals needed: 2

Tool Guides / Welding & Plasma Cutting - Manual Plasma Cutter / Resources (#1337) rev 2

Approvals needed: 2

Tool Guides / Welding & Plasma Cutting - Manual Plasma Cutter / Tool Tutorial (#1338) rev 2

Approvals needed: 2

Maintenance - Tech Ready / Injection Molder / Injection Molder - Lubricate Clamp System (#1387) rev 2

• maint_asana_section = Plastics
• maint_freq_days = 45
• maint_level = tech_ready
• maint_ref = 1775150148
• maint_task = Injection molder - lubricate clamp system
• tool_code = IJM

Approvals needed: 1

Tool Guides / Plastics - Injection Molder / Custom (3D Printed) Molds (#1394) rev 2

Approvals needed: 2

Tool Guides / Forge - Power Hammer / Manual(s) (#1401) rev 2

Approvals needed: 2

Tool Guides / Forge - Power Hammer / Member Notes (#1402) rev 2

Approvals needed: 2

Tool Guides / Forge - Power Hammer / Resources (#1403) rev 2

Approvals needed: 2

Tool Guides / Forge - Power Hammer / Tool Tutorial (#1404) rev 2

Approvals needed: 2

Tool Guides / General Woodshop - Bandsaw / Resources (#1414) rev 2

Approvals needed: 2

Tool Guides / Millwork - Resaw Bandsaw / Resources (#1415) rev 2

Approvals needed: 2

Tool Guides / Jewelry - Rolling Mill / Manual(s) (#1418) rev 2

Approvals needed: 2

Tool Guides / Jewelry - Rolling Mill / Tool Guide (#1419) rev 2

Approvals needed: 2

Tool Guides / General Woodshop - Panel Saw / Panel Saw Dust Hose Attachment (#1425) rev 2

Approvals needed: 2