Powder Coating - Sweep and Check Hoses

Service manual: https://drive.google.com/file/d/1q-U4OK-cNpTElOdnf1WNjkKlD4l9B48k/view

*Safety*

- Wear a dust mask.
- Wear safety glasses.

*Clean the Booth*

1. Turn on the booth ventilation system
2. Use a broom to sweep the walls, ceiling, and floor of the booth.
3. Use the area shop vac to vacuum up any powder.
4. Turn off the booth ventilation system.
5. Thoroughly vacuum the exterior surfaces of the powder coating booth.
6. Sweep the floor around the powder booth and both the large and small ovens.
7. Take the shop vac out to the dumpster and empty it carefully - powder coat is a fine dust

*Inspect the Hoses*

Inspect the air and powder hoses (both in the booth and by the control box) for sintering, kinking, or other degradation.

If you note any problems, file a tool report.

- Tool report: https://airtable.com/appbIlORlmbIxNU1L/shrluff2WSzy8c3xd