Safety
Check fire extinguishers
Fire extinguishers are located in the following areas: Kitchen Wood Shop Maintenance Room B...
Check First Aid Kits for low levels of supply
Check the inventory for the first aid kits. Restock any low supplies; backstock is stored in Cust...
Check workshop outlets
Check all electrical outlets on ceiling drops and floor runs for loose outlets and/or cable clamp...
Clean welding helmets and jackets
Gloves Inspect gloves. Put in a purchase request for any pairs that have holes or excessive wear...
Clean/sanitize safety glasses & hearing protection
Materials For a disinfectant, you can use: Sanitizing wipes (kept in the maintenance closet) ...
Flush Eye Wash Station (Monthly)
Run the eyewash station for 1-3 minutes. (This flushes any stagnant water from the line.)
CO Detector, Smoke Detector, and Thermostat Testing
The carbon monoxide detector is a small white plastic device located on the interior wall of the ...
Test emergency lighting
Test Emergency Lighting Turn off breaker 13 in panel A. (This breaker powers the emergency light...
Welding fume extractor - check filter
Service Fume Extractor Filter Check the filter gauge at the base of the machine. If the gauge...