Search Results

Overview Clean out any debris from the filter box underneath the machine Put in a tool report + Asana task to change the filter if it looks dirty. Procedure Setup Wear a dust mask Locate the jewelry area shop vac and bring it to the polishing...

Underneath the Rabbit lasers there's a cabinet, containing a box that collects any small pieces of material that fall through the honeycomb. Clean the Catch Boxes For each of the large format lasers: 1. Unlatch and open the bottom panel in the front of the m...

Service manual: https://drive.google.com/file/d/1q-U4OK-cNpTElOdnf1WNjkKlD4l9B48k/view*Safety*- Wear a dust mask.- Wear safety glasses.*Clean the Booth*1. Turn on the booth ventilation system2. Use a broom to sweep the walls, ceiling, and floor of the booth.3....

*Clean Out the Pitcher*1. Remove the lid. 2. Wash and dry the lid.3. Remove the top reservoir.4. Remove the filter from the top reservoir and discard.5. Wash and dry the top reservoir.6. Wash and dry the pitcher.*Replace the Filter*Observe the filter replaceme...

Clean the Interior Open the side panel. Dredge out any buildup of chips, gunk, and other debris. Ensure the cutting fluid can make its way to the sight glass on the bottom right of the machine. If it's not visible, submit a maintenance request so a traine...

* Woodshop* In the woodshop free bin and the free board caddy in the lathe area, remove any wood that: - Is painted or treated- Has nails/metal inside- Is heavily splintered- Is "swiss-cheesed" with little material to use, etc. *Metalshop* In the metalshop...

*Materials*For a disinfectant, you can use sanitizing spray (kept under the kitchen sink, with refills in the maintenance closet)Apply disinfectant, wait three minutes, then wipe with a clean cloth or paper towel.If we are out of disindectant, submit a purchas...

*Safety* - Wear a dust mask. (If you do not have your own, disposable masks are available in the custodial room.)- Wear safety glasses. *Empty Shop Vacs and Service Filters* We have 11 shop vacs - two in precision metals (one for dry, one for wet), one at t...

Welding Table Maintenance (Mig and Tig tables) Wipe table down with a dry rag.  Inspect the table for spatter/BBs. Use a straight edge to assist in finding them. If tables have not seen much use, looks to be free from BBs and still has a good coating of an...

Overview Clean the cutter head. Check cutter blades for chips and dullness. Wax the bed Generally inspect the machine for damage and loose or worn parts. Check the dust extraction for blockages. Procedure Setup Grab the maintenance cart. Rotate ...