Skip to main content
Advanced Search
Search Terms
Content Type

Exact Matches
Tag Searches
Date Options
Updated after
Updated before
Created after
Created before

Search Results

7 total results found

Sandblaster - Deep clean

Maintenance - Tech Ready Sandblaster

Safety Wear a dust mask. (If you do not have your own, disposable masks are available in the custodial room.) Wear safety glasses. Tools/Materials Required Two 2-gal buckets (should be located near the machine) Soft mallet. Clean Siphon Tube R...

tool_code
SBL
maint_ref
recLEdrUSCsHZIelq
maint_level
tech_ready
maint_freq_days
90
maint_task
Sandblaster - Deep clean
maint_asana_section
Powder Coating & Sandblasting

Inspect and rotate sandblaster nozzle

Maintenance - Tech Ready Sandblaster

Service manual - https://drive.google.com/file/d/10XyBZ8bd7pk9Vfl4iO3T76M2VwWSfi9C/view Safety Wear a dust mask. Wear safety glasses. Inspect/Rotate Nozzle Unplug the sandblaster Find a 1/8" Allen key in the maintenance cart. Unlock the carbide no...

tool_code
SBL
maint_asana_section
Powder Coating & Sandblasting
maint_ref
rec5cFJFgx4ZR3g5J
maint_level
tech_ready
maint_freq_days
7
maint_task
Inspect and rotate sandblaster nozzle

Powder Coating - Sweep and Check Hoses

Maintenance - Tech Ready Cleanup

Service manual: https://drive.google.com/file/d/1q-U4OK-cNpTElOdnf1WNjkKlD4l9B48k/view Safety Wear a dust mask. Wear safety glassess Clean the Booth Turn on the booth ventilation system Use a broom to sweep the walls, ceiling, and floor of the boot...

tool_code
PDB
maint_freq_days
14
maint_task
Powder Coating - Sweep and Check Hoses
maint_asana_section
Powder Coating & Sandblasting
maint_ref
recIgcJIAU0nmZhEh
maint_level
tech_ready

Powder Coating - Deep clean

Maintenance - Tech Ready Powder Coating Booth

Safety Wear a dust mask. (If you do not have your own, disposable masks are available in the custodial room.) Wear safety glasses. Clean the Filter Remove the fluffy filter off the wall of the booth, and the rigid filters from the rear of the machine...

tool_code
PDB
maint_level
tech_ready
maint_freq_days
365
maint_task
Powder Coating - Deep clean
maint_asana_section
Powder Coating & Sandblasting
maint_ref
recMP9xc410YukiYY

Powder Coating - Clean out hooks & wires

Maintenance - Tech Ready Powder Coating Booth

Task List Throw out any wire pieces that are excessively twisted/kinked and not useful for holding up parts. Sandblast any larger/stiff hooks that are fully coated in powder so they can better ground the parts that'll be hanging from them. Brush/vacuum ar...

tool_code
PDB
maint_asana_section
Powder Coating & Sandblasting
maint_ref
rec4BfCAqLWQmIf77
maint_level
tech_ready
maint_freq_days
60
maint_task
Powder Coating - Clean out hooks & wires

Powder Coating Ovens (both large and small) - Clean and inspect

Maintenance - Tech Ready Powder Coating Ovens

Safety - Wear a dust mask.- Wear safety glasses. Task List To wipe down oven surfaces, use a clean shop rag and a mixture of water with a little soap. Just lightly damp, not dripping wet. (Do not use solvent-based cleaners, as they can affect the powder cur...

tool_code
LPC
maint_freq_days
45
maint_task
Powder Coating Oven - Clean and inspect
maint_asana_section
Powder Coating & Sandblasting
maint_ref
recFQNrLjbhJQmPHc
maint_level
tech_ready

Empty Sandblast media separator

Maintenance - Tech Ready Sandblaster

Empty the Media Separator Drawer Behind the Plasma table is a square gray machine that is the media separator for the sand blaster. There is a drawer on the bottom with two retaining latches. Put on a dust mask and safety glasses Ensure the sandblaster i...

tool_code
SBL
maint_freq_days
7
maint_asana_section
Powder Coating & Sandblasting
maint_task
Empty Sandblast media seperator
maint_ref
recTNsp1QZQps4mRD
maint_level
tech_ready