Recently Updated Pages
Machine Shop Resources
This is a list of good resources for machining information, training, and materials. YouTube Ch...
Tool Tutorial
The pantograph is a tool that's especially useful for engraving - maker's marks etc. It uses a te...
Lumber (Hardwood, Softwood)
Local Resources Map of source: https://earth.google.com/earth/d/1ebGqEFjUO_HxITq7C18zuVl_93BiZKG...
Clean Miter Saw
Service manual: https://drive.google.com/file/d/16HFrtwBzy-s0uS8aojnePJ2yyeupkZX2/view?usp=drive_...
Clean Popcorn Maker
If the popcorn maker is already clean, you can just close out this task. *Clean Out Popcorn Comp...
Trotec manuals
8011 Speedy 300 Service Manual.pdf operating-manual-Speedy-300-8066-en-us.pdf SP300_Beam_alignm...
Community Laser Files
"T" shaped hold down laser cutter file: t_holddown_trotec.svg Wide base hold down: Tees 2024...
Trotec Rotary Tool Guide
Manuals: Rotary-guide-formatted-electronic-5-18.pdf operating-manual-Speedy-300-8066-en-us.pdf ...
Trotec Tool Guide - Flat Cutting and Engraving
Trotec Laser Speedy 300 Manuals: JobControl-Manual-EN.pdf Handbook-for-engravers.pdf The Trot...
Manuals
Operating Instructions: Phanograph Operating Instructions.pdf Spare Parts: Phanograph Spare P...
Manual(s)
Manuals and other reference materials from the manufacturer or other sources. Manual Mill-M_69...
Manual(s)
Manuals and other reference materials from the manufacturer or other sources. Model: unknown...
Tool Tutorial
1. Controller 2. Breaker switches 3. Alarm lights 4. Temperature probe 5. Latches 6. Viewing po...
Member Notes
3DBenchy File Kaytoo Print bed settings: 440x440mm. X -15mm, Y -25
Tool Recertification
DRAFT DRAFT DRAFT The recertification process is a work in progress - this guide isn't yet accur...
Resources
Spool Holder 3d print file: CNC Embroidery Spool Holder.step (print laying on its side for most s...
Empty Sandblast media separator
"Empty the Media Separator Drawer Behind the Plasma table is a square gray machine that is the m...
Fusion 360 CAM Handout
Step-by-step: Facing → Profile → Spot Drill (Fusion 360) Preparations (before creating operati...
Set up your dev environment
Let's get up and running with a dev environment, so you can make code changes without affecting p...
Mail/Package Receiving Shelf
Place a post it note or tape a slip of paper with the current date on all of packages that are ...