Search Results

The following was copied from the manual and is incomplete Operation Always check to make sure die wedges are tight. re-check wedges regularlywhen operating. A light coating anti-seize or grease on wedges is recommend-ed. Regular inspection and tightening of...

Purpose and Scope  Protohaven is committed to ensuring an environment that is free from all forms of harassment, discrimination, or conduct that can be considered coercive, or likely to create a hostile environment, including sexual harassment. Discrimina...

Overview Our front store is a volunteer-run effort to provide snacks and useful consumables to members as a perk of membership.  To be a volunteer for store management, you must: Be able to lift a ~20lb case of soda up above shoulder height Be able to tr...

* Default blade: 93.5"L x 0.25"W x 0.025"T 6TPI skip tooth blade from Olson

Default blade: 137"L x 0.75"W x 0.035"T 2/3TPI blade by Timber Wolf (1" also works)

Rolling Mill Manual.pdf

This tool guide is incomplete; these sections were taken from the manual. Safety 1. Always bolt down your rolling mill to a secure bench or secure stand for stability and safety. Also ensure that the bench or stand is securelyfixed to the floor.2. Ensure gua...

Hazards to Pets Protohaven is an active workshop that presents multiple hazards to animals, including: Prolonged loud noises that damage sensitive hearing Exposure to solvents and other chemicals through ingestion or inhalation Sharp, hot, and other harm...

The old 3D-printed duct pointed the hose directly at the user, making it difficult to see the line used to align vertical cuts.  Further, this duct was printed from an inflexible plastic, ABS, and had cracked. To correct these problems, I designed a right-a...

Introduction There are a few chemicals in use in the jewelry area. Liquids, even water should be clearly labeled. Notes Safety It is advisable to wear safety glasses when working with acids. Common Hazards Serious eye irritation .Acids will burn throug...