Search Results

This simple tutorial walks you through designing a basic 10mm "box" wrench with accurate dimensions. You can modify the shapes in this tutorial to quickly create other designs which can then be created using Protohaven's vinyl cutter, CNC plasma cutter, CNC ro...

This simple tutorial walks you through designing a 10mm "box" wrench holder with accurate dimensions. You can modify the shapes in this tutorial to quickly create other designs which can then be created using Protohaven's 3D printers, Tormach CNC mill, and oth...

Overview The teleconferencing equipment in the conference room consists of: A rolling stand with a TV A linux-based controller box that runs Zoom (other software maybe installed if needed) A wide-angle camera (located on top of the TV) An EMEET speaker/...

Underneath the Rabbit lasers there's a cabinet, containing a box that collects any small pieces of material that fall through the honeycomb. Clean the Catch Boxes For each of the large format lasers: 1. Unlatch and open the bottom panel in the front of the m...

Safety Wear glovesWear safety glassesWear a dust mask Clean Bed 1. Remove the honeycomb bed. 2. Clean up and discard any material that has fallen though the bed.3. Use a poking tool to free all of the material stuck in the honeycomb. Clean up and discard ma...

Safety: Ensure the machine is turned off and unplugged before oiling the rollers.  Oil the rollers Apply several drops of 3-in-1 oil (located in the maintenance cart) to the three large rollers of the slip roll. Most of the oil ports will be small holes tow...

Maintenance Automation The pages in this book (as well as the ones in Maintenance - Training Required and Maintenance - Admin Required) are used by software automation to periodically schedule tasks in the Shop & Maintenance Tasks Asana project.  Scheduling ...