Recently Updated Pages

Maintenance Automation The pages in this book (as well as the ones in Maintenance - Training Req...

Safety: Ensure the machine is turned off and unplugged before oiling the rollers.  Oil the roll...

*Service Fume Extractor Filter*1. Check the filter gauge at the base of the machine.2. if the gau...

Click through each camera on the Wyze app (on the iPad, located by the front desk or in the Staff...

*Materials*For a disinfectant, you can use:- Sanitizing wipes (kept in the maintenance closet)- S...

The carbon monoxide detector is a small white plastic device located on the interior wall of the ...

FIle to łaser PH logo onto saw blades Saw Blade Marking.svg

This needs to be reviewed for content and tech_ready suitability before it is approved to be sche...

Underneath the Rabbit lasers there's a cabinet, containing a box that collects any small pieces o...

Flush the Eyewash Station Run the eyewash station for  1-3 minutes. (This flushes any stagnant w...

We're starting a community contributed list of places and vendors. Login with your Neon account a...

Clean the Interior Open the side panel. Dredge out any buildup of chips, gunk, and other debr...

*Test Emergency Lighting*Turn off breaker 13 in panel A. (This breaker powers the emergency light...

Where to obtain materials, consumables, and tooling.

-standard-hopper-dryer-shd.pdf                

This file should be printed with PETG or other more durable plastic, with 100% infill It also fi...

PM9_1510007_UM_EN_ED_6_06_2023_PDF_cda7.pdf

Lubricate conveyor roller bushings with a couple drops of 3-in-1 oil from a can (located in M...

Lubricate conveyor table leadscrews and sprockets. (fig 3) Clean the leadscrews, chain, and ...

Check all electrical outlets on ceiling drops and floor runs for loose outlets and/or cable clamp...