Recently Updated Pages
Dust and Sweep Studio Area
For each tool in the studio: - Use a shop vac or dust brush to remove dust from all visible surf...
Vertical Metal Bandsaw - Weekly
Service manual: https://drive.google.com/file/d/1YgGuXN2GB-ZQffNzAmpv5Zo6hYNJFlxi/view?usp=drive_...
Dust and Sweep Forge Area
*Safety* - Wear a dust mask. - Wear safety glasses. *Task List* DO NOT dust the interior of th...
Dust and Sweep Jewelry Area
*Task List* 1. Use a shop vac, dust brush, or water-dampened paper towel to remove dust from all...
Pedestal Grinder Maintenance (Weekly)
Service manual: https://drive.google.com/file/d/1QgkvdwpKXrfAl8W_3rSlNlg2mLRIDCh6/view*Task List*...
Dust and Sweep Woodshop Area
*Safety* - Turn on the woodshop dust collection.- Wear a dust mask. (If you do not have your own...
Wood Lathe - Monthly
Service manual: https://drive.google.com/file/d/1XsSwghnqBvr8uQD0qm1M8jcJ__te2DI1/view?usp=drive_...
Test & vacuum CO detector
The carbon monoxide detector is a small white plastic device located on the interior wall of the ...
Sandblaster - Deep clean
*Safety* - Wear a dust mask. (If you do not have your own, disposable masks are available in the...
Clean Lawnmower
* Remove the battery* Clean the undercarriage using a putty knife and wire brush* Reattach the ba...
Saw Blade Marking
FIle to łaser PH logo onto saw blades Saw Blade Marking.svg
Laser 1 & 2: Clean Blower
1. Reserve each laser one at a time to ensure they're not both down at the same time. 2. Remove t...
Laser 1 & 2: Clean bed and underneath - NEEDS REVIEW
This needs to be reviewed for content and tech_ready suitability before it is approved to be sche...
Clean catch boxes below lasers 1 and 2
Underneath the Rabbit lasers there's a cabinet, containing a box that collects any small pieces o...
Flush Eye Wash Station (Monthly)
Flush the Eyewash Station Run the eyewash station for 1-3 minutes. (This flushes any stagnant w...
Sourcing Materials
We're starting a community contributed list of places and vendors. Login with your Neon account a...
Check horizontal bandsaw interior, clean if needed
Clean the Interior Open the side panel. Dredge out any buildup of chips, gunk, and other debr...
Test emergency lighting
*Test Emergency Lighting*Turn off breaker 13 in panel A. (This breaker powers the emergency light...
Powder Coating - Sweep and Check Hoses
Service manual: https://drive.google.com/file/d/1q-U4OK-cNpTElOdnf1WNjkKlD4l9B48k/view*Safety*- W...
Lubricate door hinges
*Lubricate Hinges*Add a little bit of oil to the hinges of each of the doors of: - The ED Office-...