Recently Updated Pages
Clean front desk area and shelves
*Task List* - Organize all hand tools. (Put similar tools close to each other and ensure power c...
Empty leak catcher in custodial room
In the Custodial Room (behind the Jewelry Area) there is a bucket labeled "Leak Catcher" under a ...
Dust and Sweep Studio Area
For each tool in the studio: - Use a shop vac or dust brush to remove dust from all visible surf...
Vertical Metal Bandsaw - Weekly
Service manual: https://drive.google.com/file/d/1YgGuXN2GB-ZQffNzAmpv5Zo6hYNJFlxi/view?usp=drive_...
Dust and Sweep Forge Area
*Safety* - Wear a dust mask. - Wear safety glasses. *Task List* DO NOT dust the interior of th...
Dust and Sweep Jewelry Area
*Task List* 1. Use a shop vac, dust brush, or water-dampened paper towel to remove dust from all...
Pedestal Grinder Maintenance (Weekly)
Service manual: https://drive.google.com/file/d/1QgkvdwpKXrfAl8W_3rSlNlg2mLRIDCh6/view*Task List*...
Verify tool tags (physical & digital)
*Compare Online and Physical Tool States*1. Open https://api.protohaven.org/techs 2. Make a note ...
Dust and Sweep Woodshop Area
*Safety* - Turn on the woodshop dust collection.- Wear a dust mask. (If you do not have your own...
Wood Lathe - Monthly
Service manual: https://drive.google.com/file/d/1XsSwghnqBvr8uQD0qm1M8jcJ__te2DI1/view?usp=drive_...
Empty Sandblast media seperator
"Empty the Media Seperator Drawer Behind the Plasma table is a square gray machine that is the m...
Clean welding helmets and jackets
*Gloves*Inspect gloves. Put in a purchase request for any pairs that have holes or excessive wear...
Empty shop vacs & clean filters
*Safety* - Wear a dust mask. (If you do not have your own, disposable masks are available in the...
Test & vacuum CO detector
The carbon monoxide detector is a small white plastic device located on the interior wall of the ...
Sandblaster - Deep clean
*Safety* - Wear a dust mask. (If you do not have your own, disposable masks are available in the...
Clean Lawnmower
* Remove the battery* Clean the undercarriage using a putty knife and wire brush* Reattach the ba...
Saw Blade Marking
FIle to łaser PH logo onto saw blades Saw Blade Marking.svg
Laser 1 & 2: Clean Blower
1. Reserve each laser one at a time to ensure they're not both down at the same time. 2. Remove t...
Laser 1 & 2: Clean bed and underneath - NEEDS REVIEW
This needs to be reviewed for content and tech_ready suitability before it is approved to be sche...
Laser 1 & 2: clean honeycomb
Safety Wear glovesWear safety glassesWear a dust mask Clean Bed 1. Remove the honeycomb bed. 2...