Recently Updated Pages
Powder Coating - Clean out hooks & wires
*Task List*- Throw out any wire pieces that are excessively twisted/kinked and not useful for hol...
Jointer Maintenance - Weekly
Service manual: https://drive.google.com/file/d/1x37_ONdS5rXLuT0_jYOhp-QEAz2ClziH/view?usp=drive_...
Resources
Where to obtain materials, consumables, and tooling.
Image and Data Dump For Plastic Dryer
-standard-hopper-dryer-shd.pdf
Throat Plate File
This file should be printed with PETG or other more durable plastic, with 100% infill It also fi...
Manuals
PM9_1510007_UM_EN_ED_6_06_2023_PDF_cda7.pdf
Weekly Maintenance
Lubricate conveyor roller bushings with a couple drops of 3-in-1 oil from a can (located in M...
Six Month Maintenance
Lubricate conveyor table leadscrews and sprockets. (fig 3) Clean the leadscrews, chain, and ...
Check workshop outlets
Check all electrical outlets on ceiling drops and floor runs for loose outlets and/or cable clamp...
Check fire extinguishers
Fire extinguishers are located in the following areas: Kitchen Wood Shop Maintenance Room B...
Arbor Press Periodic Maintenance
Service manual: https://drive.google.com/file/d/17N-GZd98lkBZe_qzui03i1omQ-WQyV2a/view Clean and...
Air Compressor Maintenance (Weekly)
Wiki page: https://protohaven.org/wiki/tools/air_compressor#maintenance_schedule Service manual:...
Check for missing tags on paid storage
Check for Storage Violations Open any lockers without storage tags and look for any materials ...
Throat Plate Printable FIles
Replace the throat plate on the table saw with the printable in these files: JetPlate v3.stl ...
Throat Plate Printable FIles
Replace the throat plate on the table saw with the printable in these files: JetPlate v3.step ...
Check Consumables
Check if the tip is in good condition: no obvious damage, good point, no deep pitting. Replace ...
Clean polishing machine filter
Overview Clean out any debris from the filter box underneath the machine Put in a tool repo...
Manual
https://drive.google.com/file/d/1epodmu5iSlOMjFa08aFL1iF1chJqBQEu/view (So we want to manage the...
Member Notes
Setting Up Lightburn on Your Own Computer When building projects in Lightburn on your own comput...
Woodworking
class-wood_103-millwork.pdf class-wood_104-wood_lathe.pdf