Search Results

Test the PH of the water Locate the PH test strips, in the computer cubby hole at the CNC Plasma Computer station.   Use a stick or other object to lightly stir the water in the table. Just lightly move the water in between the slats, careful not to splash...

Check the inventory for the first aid kits. Restock any low supplies; backstock is stored in Custodial. Submit purchase requests if anything is needed - especially bandages as they disappear quickly. There are three first aid kits - one each in the Kitchen, W...

*Gloves*Inspect gloves. Put in a purchase request for any pairs that have holes or excessive wear (don't throw them out until we have replacements) - Purchase request: https://protohaven.org/purchasing*Helmets* 1. Make a purchase request if the helmet is nonfu...

Place a post it note or tape a slip of paper with the current date on all of packages that are on the shelf.  Look for older packages that have been there for a week or more and move them to the lost/found shelf in Camden's office.  Important: Email Camden...

"Empty the Media Separator Drawer Behind the Plasma table is a square gray machine that is the media separator for the sand blaster. There is a drawer on the bottom with two retaining latches. Put on a dust mask and safety glasses  Ensure the sandblaster...

If the popcorn maker is already clean, you can just close out this task. *Clean Out Popcorn Compartment*1. Unplug the popcorn maker.1. Remove any stale popcorn already in the popcorn maker. *Clean the Kettle* 1. Unplug the kettle.2. Lift the kettle up and o...

Service manual: https://drive.google.com/file/d/16HFrtwBzy-s0uS8aojnePJ2yyeupkZX2/view?usp=drive_link Unplug before cleaning. The miter saw should be cleaned with vacuum or a dry rag as needed to keep free of dust. Yellow plastic panel on work surface shoul...

Weekly Welding Table Maintenance (Mig and Tig tables) Wipe table down with a dry rag.  Inspect the table for spatter/BBs. Use a straight edge to assist in finding them. If tables have not seen much use, looks to be free from BBs and still has a good coatin...

*Safety*- Wear a dust mask.- Wear safety glasses.*Task List*To wipe down oven surfaces, use a clean shop rag and a mixture of water with a little soap. Just lightly damp, not dripping wet. (Do not use solvent-based cleaners, as they can affect the powder cure....

*Safety* - Wear a dust mask. (If you do not have your own, disposable masks are available in the custodial room.)- Wear safety glasses. *Empty Shop Vacs and Service Filters* We have 11 shop vacs - two in precision metals (one for dry, one for wet), one at t...

Enter the password followed by # and ensure the light on the front of the box is green (i.e. good battery). If you see any other color, replace the batteries (4x AA). The password is present in Vaultwarden - accessible via the Chrome browser extension on the ...

Clean/Lubricate the  X/Y/Z Axis of the 3d printers Grab the cleaning kit. Located on the shelf in the 3d printer cabinet.  Use the Z Axis cleaning device in the kit. If a replacement is needed: https://www.printables.com/model/229145-z-axis-screw-cleaning-...