Advanced Search
Search Results
74 total results found
Jointer Maintenance - Weekly
Service manual: https://drive.google.com/file/d/1x37_ONdS5rXLuT0_jYOhp-QEAz2ClziH/view?usp=drive_link Task List Unplug the machine Clean the cutter head. Check cutter teeth for chips and dullness and file a tool report if needed - DO NOT ROTATE THE INSE...
Jointer Maintenance - Monthly
Task List Clean the machine with a shop vac and dry cloth. Remove the dust collection buy pulling it away from the machine Inspect up inside the dust chute and make sure it is clear of buildup. Wax the cast iron surface of the table with a paste wa...
Check ink levels on dye sub printer
Prolonged use of the product when the ink level is below the line on the tank could damage the printer. Verify on the front of the machine that the ink tank levels are not below the minimum marking. If they are, file a tool report. Tool report: https://a...
Laser 1 & 2: clean honeycomb
Safety Wear glovesWear safety glassesWear a dust mask Clean Bed 1. Remove the honeycomb bed. 2. Clean up and discard any material that has fallen though the bed.3. Use a poking tool to free all of the material stuck in the honeycomb. Clean up and discard ma...
Clean Lawnmower
Remove the battery Clean the undercarriage using a putty knife and wire brush Reattach the battery
Wood Lathe - Monthly
Service manual: https://drive.google.com/file/d/1XsSwghnqBvr8uQD0qm1M8jcJ__te2DI1/view?usp=drive_link Clean Dust and Debris Use pressurized air from the air compressor to blow out dust from around the electric motor and vfd, under the banjo and tailstock. ...
Inspect and Clean Wood Miter Saw Blade
Service manual: PENDING Inspect the Blade Inspect the saw blade for wear and damage. If any teeth are missing, yellow tag the tool in a tool report and file a purchase request if there are no spares in the maintenance room. If two consecutive teeth are m...
Clean Miter Saw
Service manual: https://drive.google.com/file/d/16HFrtwBzy-s0uS8aojnePJ2yyeupkZX2/view?usp=drive_link Procedure Unplug before cleaning. The miter saw should be cleaned with vacuum or a dry rag as needed to keep free of dust. Yellow plastic panel on work sur...
Pedestal grinder - cycle the media separator
The external air filter is a gray box to the right of the pedestal grinders. Cycle the Filter Using your foot, press and release the gray lever on the right side of the filter a few times to knock loose fine particles from the filter
Empty pedestal grinder media seperator
Empty the Media Seperator DrawerTo the right of the pedestal grinders is a big gray box that is the media separator. There is a cabinet door on the bottom with retaining latches. Put on a dust mask and safety glasses Ensure the separator is off Check th...
Powder Coating - Deep clean
Safety Wear a dust mask. (If you do not have your own, disposable masks are available in the custodial room.) Wear safety glasses. Clean the Filter Remove the fluffy filter off the wall of the booth, and the rigid filters from the rear of the machine...
Powder Coating - Clean out hooks & wires
Task List Throw out any wire pieces that are excessively twisted/kinked and not useful for holding up parts. Sandblast any larger/stiff hooks that are fully coated in powder so they can better ground the parts that'll be hanging from them. Brush/vacuum ar...
Powder Coating Ovens (both large and small) - Clean and inspect
Safety - Wear a dust mask.- Wear safety glasses. Task List To wipe down oven surfaces, use a clean shop rag and a mixture of water with a little soap. Just lightly damp, not dripping wet. (Do not use solvent-based cleaners, as they can affect the powder cur...
Pedestal Grinder Maintenance (Weekly)
Service manual: https://drive.google.com/file/d/1QgkvdwpKXrfAl8W_3rSlNlg2mLRIDCh6/view Task List Check the spacing between the tool rests and the grinding wheels. (The spacing should be less than 1/16 of an inch, never more than 1/8 Inch.) Adjust the tool...