Search Results

Making Adjustments Members are ONLY permitted to adjust the following screws and knobs on the device: Embroidery frame holder knobs (grey thumbscrews) Operation panel arm knobs (grey thumbscrews) Adjustment of the following by members without...

The pantograph needs occasional oiling. We use the way oil from the manual metal lathe that is in the black bottle on the lathe. 2 pumps of oil in each spot of the pantograph is sufficient.      There are many places to oil the machine, there are ball oil...

The coolant system on the tormach has a tank and a filter screen on it - these should be inspected and cleaned regularly so the coolant can properly flow. Gather Materials 2 Buckets, can be found past the Tormach: One 5 gallon bucket One smaller bucket...

Welding Table Maintenance (Mig and Tig tables) Wipe table down with a dry rag.  Inspect the table for spatter/BBs. Use a straight edge to assist in finding them. If tables have not seen much use, looks to be free from BBs and still has a good coating of an...

Jet 1610 Vertical Metal Bandsaw Introduction The Jet 1610 Vertical Metal Bandsaw is a manually fed cutting tool for cutting metals such as aluminum and mild steel. Unlike horizontal bandsaws, this machine allows users to guide the workpiece by hand, making i...

CNC Wood Router (Avid Pro 60x120) The Avid CNC router is used to run cutting and milling operations on various materials such as wood, plastic, and aluminum. The most common use is to use it to engrave and cut shapes out of plywood or hardwood. But the machin...

Service manual: https://drive.google.com/file/d/1YgGuXN2GB-ZQffNzAmpv5Zo6hYNJFlxi/view?usp=drive_link Task List With a thumb or cloth, check for grease on the shaft of the upper blade guide and no accumulated debris. Reapply with grease from the grease gun...

Compare Online and Physical Tool States: Open https://api.protohaven.org/techs Make a note of tools in a yellow or red state. Visit each of the tools listed as red or yellow state and verify that there is a physical tag on the tool that matches that state...

Woodshop In the woodshop free bin and the free board caddy in the lathe area, remove any wood that: Is painted or treated Has nails/metal inside Is heavily splintered Is "swiss-cheesed" with little material to use, etc. Metalshop In the metalshop ma...

Service manual: https://drive.google.com/file/d/1q-U4OK-cNpTElOdnf1WNjkKlD4l9B48k/view Safety Wear a dust mask. Wear safety glassess Clean the Booth Turn on the booth ventilation system Use a broom to sweep the walls, ceiling, and floor of the boot...

Lubricate Hinges Add a little bit of oil to the hinges of each of the doors of: The ED Office Conference Room Staff Room Design Classroom Class Supply Room Maintenance Room Custodial Room Bathrooms Front Door All three doors leading out of the stu...

Safety Wear a dust mask. (If you do not have your own, disposable masks are available in the custodial room.) Wear safety glasses. Empty Shop Vacs and Service Filters We have 11 shop vacs - two in precision metals (one for dry, one for wet), one at the...

In the Custodial Room (behind the Jewelry Area) there is a bucket labeled "Leak Catcher" under a water pipe on the left side of the room as you enter. If the bucket is more than half full, dump the water into the sink and return it to its position under the...

Safety Wear a dust mask. Wear safety glasses. Unplug all electrical equipment before cleaning. Task List With a dry cloth, wipe down all external surfaces of the sheet metal tools:  shear slip roller finger brake shrinker/stretcher turret punch...

Safety Turn on the woodshop dust collection. Wear a dust mask. (If you do not have your own, disposable masks are available in the custodial room.) Wear hearing protection. (The dust collection is loud.) Task List For each woodshop tool:  Use a sho...

For each tool in the studio: Use a shop vac or dust brush to remove dust from all visible surfaces. Sweep the floor of the studio. Dispose of any debris using the rolling trash cans.

Safety Wear a dust mask (if you do not have your own, disposable masks are available in the custodial room). Task List For each metal shop tool: Use a shop vac or dust brush to remove dust from all visible surfaces.  Sweep the floors of the general ...

Task List Use a shop vac, dust brush, or water-dampened paper towel to remove dust from all visible surfaces. (Pay special attention to the central table and the L-shaped table with finishing tools.) Wipe down the interior of the flame cabinet with a water...

Safety Wear a dust mask.  Wear safety glasses. Task List Do not dust the interior of the forges as improper cleaning may damage the refractory material. Use a shop vac or dust brush to remove dust from all visible surfaces, paying special attention ...

Service manual: Google Drive / Local PDF: DeLonghi Coffee Maker -216990-1.pdfFollow the instructions on page 10 of the manual.