Advanced Search
Search Results
541 total results found
Recharge 3D printer desiccant pack
Recharge Desiccant Pack Remove the white rectangular plastic desiccant pack from the "free filament" tote box by the 3D printing cabinet. Inspect the desiccant beads through the front window. Use the legend by the window to gauge if the beads are wet. If...
Inspect and rotate sandblaster nozzle
Service manual - https://drive.google.com/file/d/10XyBZ8bd7pk9Vfl4iO3T76M2VwWSfi9C/view Safety Wear a dust mask. Wear safety glasses. Inspect/Rotate Nozzle Unplug the sandblaster Find a 1/8" Allen key in the maintenance cart. Unlock the carbide no...
Clean/sanitize safety glasses & hearing protection
Materials For a disinfectant, you can use: Sanitizing wipes (kept in the maintenance closet) Sanitizing spray (kept under the kitchen sink, with refills in the maintenance closet) Alcohol Apply disinfectant, wait three minutes, then wipe with a clean ...
Deep clean coffee maker
Service manual: Google Drive / Local PDF: DeLonghi Coffee Maker -216990-1.pdfFollow the instructions on page 10 of the manual.
Jointer Maintenance - Weekly
Service manual: https://drive.google.com/file/d/1x37_ONdS5rXLuT0_jYOhp-QEAz2ClziH/view?usp=drive_link Task List Unplug the machine Clean the cutter head. Check cutter teeth for chips and dullness and file a tool report if needed - DO NOT ROTATE THE INSE...
Powder Coating - Clean out hooks & wires
Task List Throw out any wire pieces that are excessively twisted/kinked and not useful for holding up parts. Sandblast any larger/stiff hooks that are fully coated in powder so they can better ground the parts that'll be hanging from them. Brush/vacuum ar...
Pedestal grinder - cycle the media separator
The external air filter is a gray box to the right of the pedestal grinders. Cycle the Filter Using your foot, press and release the gray lever on the right side of the filter a few times to knock loose fine particles from the filter
Lubricate door hinges
Lubricate Hinges Add a little bit of oil to the hinges of each of the doors of: The ED Office Conference Room Staff Room Design Classroom Class Supply Room Maintenance Room Custodial Room Bathrooms Front Door All three doors leading out of the stu...
Powder Coating Ovens (both large and small) - Clean and inspect
Safety - Wear a dust mask.- Wear safety glasses. Task List To wipe down oven surfaces, use a clean shop rag and a mixture of water with a little soap. Just lightly damp, not dripping wet. (Do not use solvent-based cleaners, as they can affect the powder cur...
Powder Coating - Sweep and Check Hoses
Service manual: https://drive.google.com/file/d/1q-U4OK-cNpTElOdnf1WNjkKlD4l9B48k/view Safety Wear a dust mask. Wear safety glassess Clean the Booth Turn on the booth ventilation system Use a broom to sweep the walls, ceiling, and floor of the boot...
Update Wyze camera firmwares and adjust positioning
Click through each camera on the Wyze app (on the iPad, located by the front desk or in the Staff room). For each camera: Ensure it is online. Ensure the firmware is up to date (it will prompt if otherwise). Ensure it is pointing in a way which maximizes...
Powder Coating - Deep clean
Safety Wear a dust mask. (If you do not have your own, disposable masks are available in the custodial room.) Wear safety glasses. Clean the Filter Remove the fluffy filter off the wall of the booth, and the rigid filters from the rear of the machine...
Clean Tormach Coolant System
The coolant system on the tormach has a tank and a filter screen on it - these should be inspected and cleaned regularly so the coolant can properly flow. Gather Materials 2 Buckets, can be found past the Tormach: One 5 gallon bucket One smaller bucket...
CNC router dust collector - check interface between filter and bag
Safety Wear a dust mask. (If you do not have your own, disposable masks are available in the custodial room.) Wear safety glasses. Check and clean interface Remove the top filter from the dust collector using the handle at the top. Visually inspect ...
Clean out overhead air filters in woodshop
Safety Wear eye protection. Wear a dust mask. Cleaning the Filters Do this when the woodshop is not actively in use. Carefully lower the two overhead air filters in the woodshop using the winches mounted to the wall. Vacuum out the filters and the ...
Downdraft Table Monthly Maintenance
Service manual: https://drive.google.com/file/d/1t_Rllh8OS5fv1GuQ800Qa1ZzpGfTkGr9/view Safety Wear a dust mask. Wear hearing protection. Wear safety glasses. Clean Downdraft Table Clean and/or vacuum dust drawer. (Dust drawer located on front face,...
Clean wash tub and water fountain
Wash Sink and Water Fountain Remove and discard any debris from the sink. Wash both sections of the sink and the top surface of the water fountain with soapy water. If Barkeep's friend or other stainless steel cleaner is available, follow the directions...
Empty pedestal grinder media seperator
Empty the Media Seperator DrawerTo the right of the pedestal grinders is a big gray box that is the media separator. There is a cabinet door on the bottom with retaining latches. Put on a dust mask and safety glasses Ensure the separator is off Check th...
Clean the water pitcher
Clean Out the Pitcher Remove the lid. Wash and dry the lid. Remove the top reservoir. Remove the filter from the top reservoir and discard. Wash and dry the top reservoir. Wash and dry the pitcher. Replace the Filter Observe the filter replacement ...
Jointer Maintenance - Monthly
Task List Clean the machine with a shop vac and dry cloth. Remove the dust collection buy pulling it away from the machine Inspect up inside the dust chute and make sure it is clear of buildup. Wax the cast iron surface of the table with a paste wa...