Search Results

Perform weekly maintenance Remove the lower panel on the infeed side of the machine. Vacuum dust buildup from inside cabinet and off motor. Check v-belts for damage, tension, and wear. Yellow/Red tag the machine if issues are observed.  Check for problema...

Test the PH of the water Locate the PH test strips, in the computer cubby hole at the CNC Plasma Computer station.   Use a stick or other object to lightly stir the water in the table. Just lightly move the water in between the slats, careful not to splash...

Recharge Desiccant Pack Remove the white rectangular plastic desiccant pack from the "free filament" tote box by the 3D printing cabinet. Inspect the desiccant beads through the front window. Use the legend by the window to gauge if the beads are wet. If...

Safety Wear a dust mask. Wear safety glasses. Unplug all electrical equipment before cleaning. Task List With a dry cloth, wipe down all external surfaces of the sheet metal tools:  shear slip roller finger brake shrinker/stretcher turret punch...

Safety Wear eye protection. Wear a dust mask. Cleaning the Filters Do this when the woodshop is not actively in use. Carefully lower the two overhead air filters in the woodshop using the winches mounted to the wall. Vacuum out the filters and the ...

Service manual: https://drive.google.com/file/d/1t_Rllh8OS5fv1GuQ800Qa1ZzpGfTkGr9/view Safety Wear a dust mask. Wear hearing protection. Wear safety glasses. Clean Downdraft Table Clean and/or vacuum dust drawer. (Dust drawer located on front face,...

Safety Wear a dust mask. (If you do not have your own, disposable masks are available in the custodial room.) Wear safety glasses. Check and clean interface Remove the top filter from the dust collector using the handle at the top. Visually inspect ...

Task List Clean the machine with a shop vac and dry cloth. Remove the dust collection buy pulling it away from the machine Inspect up inside the dust chute and make sure it is clear of buildup.  Wax the cast iron surface of the table with a paste wa...

Prolonged use of the product when the ink level is below the line on the tank could damage the printer. Verify on the front of the machine that the ink tank levels are not below the minimum marking. If they are, file a tool report. Tool report: https://a...

Service manual: https://drive.google.com/file/d/1XsSwghnqBvr8uQD0qm1M8jcJ__te2DI1/view?usp=drive_link Clean Dust and Debris Use pressurized air from the air compressor to blow out dust from around the electric motor and vfd, under the banjo and tailstock. ...

Service manual: PENDING Inspect the Blade Inspect the saw blade for wear and damage. If any teeth are missing, yellow tag the tool in a tool report and file a purchase request if there are no spares in the maintenance room. If two consecutive teeth are m...

Run the eyewash station for  1-3 minutes. (This flushes any stagnant water from the line.) 

Click through each camera on the Wyze app (on the iPad, located by the front desk or in the Staff room). For each camera: Ensure it is online. Ensure the firmware is up to date (it will prompt if otherwise). Ensure it is pointing in a way which maximizes...

Sharp metal debris can accumulate in our parking lot - this poses a hazard to car tires, so it's important to periodically pick up metallic sharp objects using our magnet roller. Retrieve the magnet roller, usually located near the recycling bin by the forg...

The carbon monoxide detector is a small white plastic device located on the interior wall of the custodial room just to the right of the door. Test CO Detector Push the test button on the carbon monoxide detector.  If it doesn't beep, the batteries are li...