Search Results

*Safety*- Wear a dust mask. (If you do not have your own, disposable masks are available in the custodial room.)- Wear safety glasses.- Wear hearing protection.- Wear gloves when handling chips.*Clean Tormach*1. Vacuum out the ways and the chip tray using the ...

*Test Emergency Lighting*Turn off breaker 13 in panel A. (This breaker powers the emergency lighting.) With the breaker off, confirm emergency lights are working in the following areas:- by the bathrooms- in the studio / front half of the building- in the wood...

"Empty the Media Seperator Drawer Behind the Plasma table is a square gray machine that is the media separator for the sand blaster. There is a drawer on the bottom with two retaining latches. Put on a dust mask and safety glasses  Ensure the sandblaster...

Clean the Interior Open the side panel. Dredge out any buildup of chips, gunk, and other debris. Ensure the cutting fluid can make its way to the sight glass on the bottom right of the machine. If it's not visible, submit a maintenance request so a traine...

Safety: Ensure the machine is turned off and unplugged before oiling the rollers.  Oil the rollers Apply several drops of 3-in-1 oil (located in the maintenance cart) to the three large rollers of the slip roll. Most of the oil ports will be small holes tow...

Maintenance Automation The pages in this book (as well as the ones in Maintenance - Training Required and Maintenance - Admin Required) are used by software automation to periodically schedule tasks in the Shop & Maintenance Tasks Asana project.  Scheduling ...

The coolant system on the tormach has a tank and a filter screen on it - these should be inspected and cleaned regularly so the coolant can properly flow.*Gather Materials*- 2 Buckets, can be found past the Tormach. One 5 gallon and one smaller bucket that has...