Search Results

Safety-Oriented User Guide for the Evolution S355MCS Mitre Saw The Evolution S355MCS Mitre Saw is a powerful tool designed for cutting various materials, including mild steel, and aluminum. To ensure safe and effective operation, please adhere to the followin...

Lubricate conveyor roller bushings with a couple drops of 3-in-1 oil from a can (located in Maintenance Cart drawer) in holes(fig 1). The manual says this should be done daily—since we do not see daily use, weekly should be OK Avoid adding too much oil...

Perform weekly maintenance Remove the lower panel on the infeed side of the machine. Vacuum dust buildup from inside cabinet and off motor. Check v-belts for damage, tension, and wear. Yellow/Red tag the machine if issues are observed.  Check for problema...

Lubricate conveyor table leadscrews and sprockets. (fig 3) Clean the leadscrews, chain, and sprockets with a soft wire brush. Apply 1–2 pumps of grease from a grease gun onto the sprockets and leadscrew threads. Adjust the conveyor up or down to spread...

This needs to be reviewed for content and tech_ready suitability before it is approved to be scheduled maintenance Remove the bed and clean up the material that has fallen though. Use a poking tool to free all of the material stuck in the honeycomb. Acqui...

Reserve each laser one at a time to ensure they're not both down at the same time.  Remove the blower from the system and loosen any large debris on the slots on the blower cage with a flathead screwdriver, then brush clean with a bristle brush. Be careful ...

Introduction The Evolution S355MCS Mitre Saw is a powerful tool designed for cutting various materials, including mild steel, and aluminum.  Notes Safety Read and understand the instructions. Before operating the saw, thoroughly read the instruction manu...

If you clicked a link somewhere to get to this page, the tool guide likely does not exist for this tool. Contact hello@protohaven.org or mention this in #documentation or #software on our Discord. Tool Guide Smart Links See this pull request for implementati...

Remove the battery Clean the undercarriage using a putty knife and wire brush Reattach the battery

Service manual: PENDING Inspect the Blade Inspect the saw blade for wear and damage. If any teeth are missing, yellow tag the tool in a tool report and file a purchase request if there are no spares in the maintenance room. If two consecutive teeth are m...

Safety Wear a dust mask. (If you do not have your own, disposable masks are available in the custodial room.) Wear safety glasses. Tools/Materials Required Two 2-gal buckets (should be located near the machine) Soft mallet. Clean Siphon Tube R...

Safety Wear a dust mask. Wear safety glasses. Unplug all electrical equipment before cleaning. Task List With a dry cloth, wipe down all external surfaces of the sheet metal tools:  shear slip roller finger brake shrinker/stretcher turret punch...

The carbon monoxide detector is a small white plastic device located on the interior wall of the custodial room just to the right of the door. Test CO Detector Push the test button on the carbon monoxide detector.  If it doesn't beep, the batteries are li...

Safety Wear a dust mask. (If you do not have your own, disposable masks are available in the custodial room.) Wear safety glasses. Empty Shop Vacs and Service Filters We have 11 shop vacs - two in precision metals (one for dry, one for wet), one at the...

Woodshop In the woodshop free bin and the free board caddy in the lathe area, remove any wood that: Is painted or treated Has nails/metal inside Is heavily splintered Is "swiss-cheesed" with little material to use, etc. Metalshop In the metalshop ma...

Gloves Inspect gloves. Put in a purchase request for any pairs that have holes or excessive wear (don't throw them out until we have replacements)  Purchase request: https://protohaven.org/purchasing Helmets  Make a purchase request if the helmet is nonf...

Empty the Media Separator Drawer Behind the Plasma table is a square gray machine that is the media separator for the sand blaster. There is a drawer on the bottom with two retaining latches. Put on a dust mask and safety glasses Ensure the sandblaster i...

Service manual: https://drive.google.com/file/d/1XsSwghnqBvr8uQD0qm1M8jcJ__te2DI1/view?usp=drive_link Clean Dust and Debris Use pressurized air from the air compressor to blow out dust from around the electric motor and vfd, under the banjo and tailstock. ...

Safety Turn on the woodshop dust collection. Wear a dust mask. (If you do not have your own, disposable masks are available in the custodial room.) Wear hearing protection. (The dust collection is loud.) Task List For each woodshop tool:  Use a sho...

Compare Online and Physical Tool States: Open https://api.protohaven.org/techs Make a note of tools in a yellow or red state. Visit each of the tools listed as red or yellow state and verify that there is a physical tag on the tool that matches that state...