Search Results

MIG Manual

How to Change the MIG Wire https://www.youtube.com/watch?v=ySdGVEg6Epk Skip 3:10-5:17 

Woodshop grinders These grinders can be used to sharpen steel hand tools like gouges, hand planes, and chisels. Using these machines safely is not difficult, but achieving sharp edges takes patience and technique. Parts of the grinding setup Slow speed we...

Test the PH of the water Locate the PH test strips, in the computer cubby hole at the CNC Plasma Computer station.   Use a stick or other object to lightly stir the water in the table. Just lightly move the water in between the slats, careful not to splash...

Underneath the Rabbit lasers there's a cabinet, containing a box that collects any small pieces of material that fall through the honeycomb. Clean the Catch Boxes For each of the large format lasers: 1. Unlatch and open the bottom panel in the front of the m...

Safety Wear glovesWear safety glassesWear a dust mask Clean Bed 1. Remove the honeycomb bed. 2. Clean up and discard any material that has fallen though the bed.3. Use a poking tool to free all of the material stuck in the honeycomb. Clean up and discard ma...

This needs to be reviewed for content and tech_ready suitability before it is approved to be scheduled maintenance Remove the bed and clean up the material that has fallen though. Use a poking tool to free all of the material stuck in the honeycomb. Acqui...

1. Reserve each laser one at a time to ensure they're not both down at the same time. 2. Remove the blower from the system and loosen any large debris on the slots on the blower cage with a flathead screwdriver, then brush clean with a bristle brush. Be carefu...

Introduction The Evolution S355MCS Mitre Saw is a powerful tool designed for cutting various materials, including mild steel, and aluminum.  Notes Safety Read and understand the instructions. Before operating the saw, thoroughly read the instruction manu...

This file should be printed with PETG or other more durable plastic, with 100% infill It also fits the regular bandsaw.  JetPlate.step  

Work holding In general, no hard metal hold downs are safe for the CNC, like screws or metal clamps, because of the risk of ejecting shrapnel out into the shop. Strategies Brass screws and composite nails may be used, and are available in the shop. Be sure ...

If you clicked a link somewhere to get to this page, the tool guide likely does not exist for this tool. Contact hello@protohaven.org or mention this in #documentation or #software on our Discord. Tool Guide Smart Links See this pull request for implementati...

-standard-hopper-dryer-shd.pdf                

FIle to łaser PH logo onto saw blades Saw Blade Marking.svg

Introduction Notes Safety Hot parts, Compressed air hazard, pinch points (electric assisted lift) Common Hazards Hot parts Care Be Careful Remove any protective film from plastic before putting it under the heater TAKE CARE WHEN REACHING TO THE BACK...

Formech_686_mHUB_User_Guide_.pdf Formech_686_owners_service_and_opertation.pdf Vacuum-Forming-Guide-for-the-Classroom-Aug-24-v1.pdf

Where to obtain materials, consumables, and tooling.

A temperature probe on the heat shield under the heater when it's pushed back would help a lot with knowing when it's ready to use Blinds for the window, please! Very bright, hard to see the HMI Premade MDF baseplates would be pretty nice.