Weekly Maintenance

• Lubricate conveyor roller bushings with a couple drops of oil from a can (fig 1).
  • The manual says this should be done daily—since we do not see daily use, weekly should be OK
  • Avoid adding too much oil, which attracts sawdust
• Vacuum dust buildup from underneath top cover.
• Vacuum dust buildup from inside cabinet and off motor.
  
• Check for worn or damaged sandpaper. Make a tool report that yellow tags the sander and alert the maintenance crew if the sandpaper needs to be cleaned. 
• Check to see if the belt is tracking properly. The conveyor belt should not be touching the silver metal shields on each side. Make a tool report that yellow tags the sander and alert the maintenance crew if the conveyor belt tracking needs to be adjusted. 

 (fig 1)