Weekly Maintenance

• Check that the belt is not tending toward the left or right and adjust it according to the steps above, if needed.
  
• Lubricate conveyor roller bushings with a couple drops of oil from a can (fig 1).
  • The manual says this should be done daily—since we do not see daily use, weekly should be OK
  • Avoid adding too much oil, which attracts sawdust
• Vacuum dust buildup from underneath top cover.
• Vacuum dust buildup from inside cabinet and off motor.
  
• Check for worn or damaged sandpaper
• Check to see if the belt is tracking properly, adjusting it if not.

 (fig 1)