Recharge 3D printer desiccant pack

*Recharge DessicantDesiccant Pack*

1. Remove the white rectangular plastic dessicantdesiccant pack from the "free filament" tote box by the 3D printing cabinet.
2. Inspect the dessicantdesiccant beads through the front window.
3. Use the legend by the window to gauge if the beads are wet.
4. If the beads are wet, plug the dessicantdesiccant pack into a wall outlet for a couple hours.outlet. *Set a timer* soand youcheck don'tevery forgettwo hours. The unit will heat up to returndrive it.out the moisture, which will bead up on the inside of the unit before evaporating. Once the condensation is gone and the beads are a happy color again, unplug the unit.
5. Return the dried dessicantdesiccant pack to the filament box and ensure the lid is closed.