Search Results

1. Reserve each laser one at a time to ensure they're not both down at the same time. 2. Remove the blower from the system and loosen any large debris on the slots on the blower cage with a flathead screwdriver, then brush clean with a bristle brush. Be carefu...

*Task List*- Throw out any wire pieces that are excessively twisted/kinked and not useful for holding up parts.- Sandblast any larger/stiff hooks that are fully coated in powder so they can better ground the parts that'll be hanging from them.- Brush/vacuum ar...

*Wash Sink and Water Fountain*Remove and discard any debris from the sink.Wash both sections of the sink and the top surface of the water fountain with soapy water. If Barkeep's friend or other stainless steel cleaner is available, follow the directions on the...

The coolant system on the tormach has a tank and a filter screen on it - these should be inspected and cleaned regularly so the coolant can properly flow.*Gather Materials*- 2 Buckets, can be found past the Tormach. One 5 gallon and one smaller bucket that has...

Service manual: https://drive.google.com/file/d/16HFrtwBzy-s0uS8aojnePJ2yyeupkZX2/view?usp=drive_link Unplug before cleaning. The miter saw should be cleaned with vacuum or a dry rag as needed to keep free of dust. Yellow plastic panel on work surface shoul...

Enter the password followed by # and ensure the light on the front of the box is green (i.e. good battery). If you see any other color, replace the batteries (4x AA). The password is present in Vaultwarden - accessible via the Chrome browser extension on the ...