Search Results

Service manual: https://drive.google.com/file/d/17N-GZd98lkBZe_qzui03i1omQ-WQyV2a/view Clean and Lubricate Wipe off or vacuum the accumulated debris and dust. Lubricate the arbor press ram with a light machine oil. Check and Service Ram Check the ram ...

Lubricate conveyor table leadscrews and sprockets. (fig 3) Clean the leadscrews, chain, and sprockets with a soft wire brush. Apply 1–2 pumps of grease from a grease gun onto the sprockets and leadscrew threads. Adjust the conveyor up or down to spread...

This needs to be reviewed for content and tech_ready suitability before it is approved to be scheduled maintenance Remove the bed and clean up the material that has fallen though. Use a poking tool to free all of the material stuck in the honeycomb. Acqui...

* Remove the battery* Clean the undercarriage using a putty knife and wire brush* Reattach the battery

Service manual: https://drive.google.com/file/d/1yOemAE1Cz4E7A3Ecoyp32BPV_nxDVeOf/viewFollow the instructions on page 10 of the manual.

*Empty the Media Seperator Drawer*To the right of the pedestal grinders is a big gray box that is the media separator. There is a cabinet door on the bottom with retaining latches. 1. Put on a dust mask and safety glasses2. Ensure the separator is off3. Check ...

*Service Fume Extractor Filter*1. Check the filter gauge at the base of the machine.2. if the gauge indicates replacement is needed, fetch (or purchase request) a new one and swap the old one out.- Purchase request: https://protohaven.org/purchasing