Search Results

Lubricate conveyor table leadscrews and sprockets. (fig 3) Clean the leadscrews, chain, and sprockets with a soft wire brush. Apply 1–2 pumps of grease from a grease gun onto the sprockets and leadscrew threads. Adjust the conveyor up or down to spread...

Lubricate conveyor roller bushings with a couple drops of 3-in-1 oil from a can (located in Maintenance Cart drawer) in holes(fig 1). The manual says this should be done daily—since we do not see daily use, weekly should be OK Avoid adding too much oil...

Perform weekly maintenance Remove the lower panel on the infeed side of the machine. Vacuum dust buildup from inside cabinet and off motor. Check v-belts for damage, tension, and wear. Yellow/Red tag the machine if issues are observed.  Check for problema...

Overview Clean the cutter head. Check cutter blades for chips and dullness. Wax the bed Generally inspect the machine for damage and loose or worn parts. Check the dust extraction for blockages. Procedure Setup Grab the maintenance cart. Rotate ...

Safety Turn on the woodshop dust collection. Wear a dust mask. (If you do not have your own, disposable masks are available in the custodial room.) Wear hearing protection. (The dust collection is loud.) Task List For each woodshop tool:  Use a sho...

Service manual: https://drive.google.com/file/d/1t_Rllh8OS5fv1GuQ800Qa1ZzpGfTkGr9/view Safety Wear a dust mask. Wear hearing protection. Wear safety glasses. Clean Downdraft Table Clean and/or vacuum dust drawer. (Dust drawer located on front face,...

Service manual: https://drive.google.com/file/d/1x37_ONdS5rXLuT0_jYOhp-QEAz2ClziH/view?usp=drive_link Task List Unplug the machine Clean the cutter head.  Check cutter teeth for chips and dullness and file a tool report if needed - DO NOT ROTATE THE INSE...

Task List Clean the machine with a shop vac and dry cloth. Remove the dust collection buy pulling it away from the machine Inspect up inside the dust chute and make sure it is clear of buildup.  Wax the cast iron surface of the table with a paste wa...

Service manual: https://drive.google.com/file/d/1XsSwghnqBvr8uQD0qm1M8jcJ__te2DI1/view?usp=drive_link Clean Dust and Debris Use pressurized air from the air compressor to blow out dust from around the electric motor and vfd, under the banjo and tailstock. ...

Service manual: PENDING Inspect the Blade Inspect the saw blade for wear and damage. If any teeth are missing, yellow tag the tool in a tool report and file a purchase request if there are no spares in the maintenance room. If two consecutive teeth are m...

Service manual: https://drive.google.com/file/d/16HFrtwBzy-s0uS8aojnePJ2yyeupkZX2/view?usp=drive_link Procedure Unplug before cleaning. The miter saw should be cleaned with vacuum or a dry rag as needed to keep free of dust. Yellow plastic panel on work sur...