Search Results

*Safety*- Wear a dust mask. (If you do not have your own, disposable masks are available in the custodial room.)- Wear safety glasses.*Clean the Filter*1. Remove the fluffy filter off the wall of the booth, and the rigid filters from the rear of the machine.2....

The coolant system on the tormach has a tank and a filter screen on it - these should be inspected and cleaned regularly so the coolant can properly flow.*Gather Materials*- 2 Buckets, can be found past the Tormach. One 5 gallon and one smaller bucket that has...

*Safety*- Wear a dust mask. (If you do not have your own, disposable masks are available in the custodial room.)- Wear safety glasses.*Check and clean interface*1. Remove the top filter from the dust collector using the handle at the top.2. Visually inspect an...

*Safety*- Wear eye protection.- Wear a dust mask. *Cleaning the Filters*Do this when the woodshop is not actively in use.1. Carefully lower the two overhead air filters in the woodshop using the winches mounted to the wall.2. Vacuum out the filters and the cat...

Service manual: https://drive.google.com/file/d/1t_Rllh8OS5fv1GuQ800Qa1ZzpGfTkGr9/view*Safety*- Wear a dust mask.- Wear hearing protection.- Wear safety glasses.*Clean Downdraft Table*1. Clean and/or vacuum dust drawer. (Dust drawer located on front face, bott...

*Wash Sink and Water Fountain*Remove and discard any debris from the sink.Wash both sections of the sink and the top surface of the water fountain with soapy water. If Barkeep's friend or other stainless steel cleaner is available, follow the directions on the...

*Empty the Media Seperator Drawer*To the right of the pedestal grinders is a big gray box that is the media separator. There is a cabinet door on the bottom with retaining latches. 1. Put on a dust mask and safety glasses2. Ensure the separator is off3. Check ...

*Clean Out the Pitcher*1. Remove the lid. 2. Wash and dry the lid.3. Remove the top reservoir.4. Remove the filter from the top reservoir and discard.5. Wash and dry the top reservoir.6. Wash and dry the pitcher.*Replace the Filter*Observe the filter replaceme...

*Task List*- Clean the machine with a shop vac and dry cloth.- Wax the cast iron surface of the table- Spray a light amount of teflon lubricant on the support pillars- Check the motor drive belt for wear, splits and cuts. If the drive belt is in poor shape, su...

Service manual: https://drive.google.com/file/d/16HFrtwBzy-s0uS8aojnePJ2yyeupkZX2/view?usp=drive_link*Tools/Materials Required*- General purpose oil- Light household oil (sewing machine oil)*Clean Lower Guard*1. Unplug the saw. (We want to eliminate the possib...

*Service Fume Extractor Filter*1. Check the filter gauge at the base of the machine.2. if the gauge indicates replacement is needed, fetch (or purchase request) a new one and swap the old one out.- Purchase request: https://protohaven.org/purchasing

*Materials*For a disinfectant, you can use sanitizing spray (kept under the kitchen sink, with refills in the maintenance closet)Apply disinfectant, wait three minutes, then wipe with a clean cloth or paper towel.If we are out of disindectant, submit a purchas...

Prolonged use of the product when the ink level is below the line on the tank could damage the printer.* Verify on the front of the machine that the ink tank levels are not below the minimum marking. If they are, file a tool report.- Tool report: https://airta...

*Safety*- Wear a dust mask. (If you do not have your own, disposable masks are available in the custodial room.)- Wear safety glasses.- Wear hearing protection.- Wear gloves when handling chips.*Clean Tormach*1. Vacuum out the ways and the chip tray using the ...

*Test Emergency Lighting*Turn off breaker 13 in panel A. (This breaker powers the emergency lighting.) With the breaker off, confirm emergency lights are working in the following areas:- by the bathrooms- in the studio / front half of the building- in the wood...

Replacement Throat Plates for the Router Table We have a Woodpeckers model number mumble router table attachment, which accepts plastic throat plates for supporting workpieces against various sized bits. The throat plates have proven to be somewhat sacrificia...

  Introduction Notes Safety Common Hazards Care Use Consumables Tooling (recommendations for bringing own tooling/parts: blades, bits, cutters, etc.) Materials (what can and cannot be worked with the tool) Parts of the Tool Annotated Image(s) Par...

Introduction We have several 3D printers: Prusa MK2s Prusa MK3s Prusa MK3s Creality CR-10 MAX Notes Safety Common Hazards Care Use Consumables Tooling (recommendations for bringing own tooling/parts: blades, bits, cutters, etc.) Materials ...

Introduction Notes Safety Common Hazards Care Use Consumables Blades Shop blades are available for member use. If you want a specific blade of a known sharpness or for specific work (fine cuts, etc.), members are encouraged to purchase their own blad...

Manuals and other reference materials from the manufacturer or other sources.