Skip to main content
Advanced Search
Search Terms
Content Type

Exact Matches
Tag Searches
Date Options
Updated after
Updated before
Created after
Created before

Search Results

115 total results found

Clean wash tub and water fountain

Maintenance - Tech Ready Cleanup

Wash Sink and Water Fountain Remove and discard any debris from the sink. Wash both sections of the sink and the top surface of the water fountain with soapy water. If Barkeep's friend or other stainless steel cleaner is available, follow the directions...

tool_code
FAC
maint_freq_days
60
maint_task
Clean wash tub and water fountain
maint_asana_section
Facilities Maintenance
maint_ref
recZNyGirmDDTCX3g
maint_level
tech_ready

Clean the water pitcher

Maintenance - Tech Ready Cleanup

Clean Out the Pitcher Remove the lid. Wash and dry the lid. Remove the top reservoir. Remove the filter from the top reservoir and discard. Wash and dry the top reservoir. Wash and dry the pitcher. Replace the Filter Observe the filter replacement ...

tool_code
FAC
maint_freq_days
14
maint_task
Clean the water pitcher
maint_asana_section
Miscellaneous
maint_ref
recdBQw8LStFpOb2p
maint_level
tech_ready

Clean Popcorn Maker

Maintenance - Tech Ready Cleanup

If the popcorn maker is already clean, you can just close out this task. Clean Out Popcorn Compartment Unplug the popcorn maker. Remove any stale popcorn already in the popcorn maker. Clean the Kettle Unplug the kettle. Lift the kettle up and out o...

tool_code
FAC
maint_freq_days
21
maint_task
Clean Popcorn Maker
maint_asana_section
Facilities Maintenance
maint_ref
rec2zujXMBm6dRXj3
maint_level
tech_ready

Clean out overhead air filters in woodshop

Maintenance - Tech Ready Cleanup

Safety Wear eye protection. Wear a dust mask. Cleaning the Filters Do this when the woodshop is not actively in use. Carefully lower the two overhead air filters in the woodshop using the winches mounted to the wall. Vacuum out the filters and the ...

tool_code
FAC
maint_ref
recTz4hQMdurWGVNm
maint_level
tech_ready
maint_freq_days
30
maint_task
Clean out overhead air filters in woodshop
maint_asana_section
Facilities Maintenance

Clean front desk area and shelves

Maintenance - Tech Ready Cleanup

Task List Organize all hand tools. (Put similar tools close to each other and ensure power cables are nicely stowed.) Place any loose papers on the front desk in the desk organizer on the left hand side of the desk. Notify the #techs channel on Discord of ...

maint_ref
recAop95ivLXRJq7M
tool_code
FAC
maint_level
tech_ready
maint_freq_days
9
maint_task
Clean front desk area and shelves
maint_asana_section
Facilities Maintenance

Clean Computer Lab and Conference Room

Maintenance - Tech Ready Cleanup

Materials For a disinfectant, you can use sanitizing spray (kept under the kitchen sink, with refills in the maintenance closet) Apply disinfectant, wait three minutes, then wipe with a clean cloth or paper towel. If we are out of disindectant, submit a pur...

tool_code
CFR
maint_level
tech_ready
maint_freq_days
14
maint_task
Clean Computer Lab and Conference Room
maint_asana_section
Facilities Maintenance
maint_ref
recgh7rLnduO2Ek3m

Deep Clean Tormach CNC

Maintenance - Tech Ready CNC Metal Mill (Tormach)

Safety Wear a dust mask. (If you do not have your own, disposable masks are available in the custodial room.) Wear safety glasses. Wear hearing protection. Wear gloves when handling chips. Clean Tormach Vacuum out the ways and the chip tray using t...

tool_code
TMH
maint_asana_section
Machine Shop
maint_ref
recrF56GkoNgufC5h
maint_level
tech_ready
maint_freq_days
90
maint_task
Deep Clean Tormach CNC

Downdraft Table Monthly Maintenance

Maintenance - Tech Ready Downdraft Table

Service manual: https://drive.google.com/file/d/1t_Rllh8OS5fv1GuQ800Qa1ZzpGfTkGr9/view Safety Wear a dust mask. Wear hearing protection. Wear safety glasses. Clean Downdraft Table Clean and/or vacuum dust drawer. (Dust drawer located on front face,...

tool_code
DFT
maint_freq_days
30
maint_task
Downdraft Table Monthly Maintenance
maint_asana_section
Woodshop
maint_ref
recXiULPRFB8MCLFf
maint_level
tech_ready

CNC router dust collector - check interface between filter and bag

Maintenance - Tech Ready CNC Router

Safety Wear a dust mask. (If you do not have your own, disposable masks are available in the custodial room.) Wear safety glasses. Check and clean interface Remove the top filter from the dust collector using the handle at the top. Visually inspect ...

tool_code
CCR
maint_task
CNC router dust collector - check interface between filter and bag
maint_asana_section
CNC Router
maint_ref
recTpvaEJyjlZgVIX
maint_level
tech_ready
maint_freq_days
30

Jointer Maintenance - Weekly

Maintenance - Tech Ready Jointer

Service manual: https://drive.google.com/file/d/1x37_ONdS5rXLuT0_jYOhp-QEAz2ClziH/view?usp=drive_link Task List Unplug the machine Clean the cutter head.  Check cutter teeth for chips and dullness and file a tool report if needed - DO NOT ROTATE THE INSE...

tool_code
JNT
maint_asana_section
Woodshop
maint_ref
recCm6eI9ag2LkLkJ
maint_level
tech_ready
maint_freq_days
7
maint_task
Jointer Maintenance - Weekly

Jointer Maintenance - Monthly

Maintenance - Tech Ready Jointer

Task List Clean the machine with a shop vac and dry cloth. Remove the dust collection buy pulling it away from the machine Inspect up inside the dust chute and make sure it is clear of buildup.  Wax the cast iron surface of the table with a paste wa...

tool_code
JNT
maint_level
tech_ready
maint_freq_days
30
maint_task
Jointer Maintenance - Monthly
maint_asana_section
Woodshop
maint_ref
recdRlatLtAHlwgmT

Check ink levels on dye sub printer

Maintenance - Tech Ready Dye Sublimation Printer

Prolonged use of the product when the ink level is below the line on the tank could damage the printer. Verify on the front of the machine that the ink tank levels are not below the minimum marking. If they are, file a tool report. Tool report: https://a...

tool_code
DSB
maint_level
tech_ready
maint_freq_days
30
maint_task
Check ink levels on dye sub printer
maint_asana_section
Graphics
maint_ref
rech07Gvq2tAK5d2Y

Laser 1 & 2: clean honeycomb

Maintenance - Tech Ready Laser Cutter, Rabbit

Safety Wear glovesWear safety glassesWear a dust mask Clean Bed 1. Remove the honeycomb bed. 2. Clean up and discard any material that has fallen though the bed.3. Use a poking tool to free all of the material stuck in the honeycomb. Clean up and discard ma...

tool_code
LS1
maint_task
Laser 1 & 2: clean honeycomb
maint_asana_section
Lasers
maint_ref
recJErJCZu2afpsYF
maint_level
tech_ready
maint_freq_days
60

Clean Lawnmower

Maintenance - Tech Ready Lawnmower

Remove the battery Clean the undercarriage using a putty knife and wire brush Reattach the battery

tool_code
LMR
maint_task
Clean Lawnmower
maint_asana_section
Facilities Maintenance
maint_freq_days
180
maint_ref
rec0HvMD8sQNEWtxJ
maint_level
tech_ready

Wood Lathe - Monthly

Maintenance - Tech Ready Lathe, Wood

Service manual: https://drive.google.com/file/d/1XsSwghnqBvr8uQD0qm1M8jcJ__te2DI1/view?usp=drive_link Clean Dust and Debris Use pressurized air from the air compressor to blow out dust from around the electric motor and vfd, under the banjo and tailstock. ...

tool_code
WLH
maint_level
tech_ready
maint_freq_days
30
maint_task
Wood Lathe - Monthly
maint_asana_section
Woodshop
maint_ref
WLH

Inspect and Clean Wood Miter Saw Blade

Maintenance - Tech Ready Miter Saw, Wood

Service manual: PENDING Inspect the Blade Inspect the saw blade for wear and damage. If any teeth are missing, yellow tag the tool in a tool report and file a purchase request if there are no spares in the maintenance room. If two consecutive teeth are m...

tool_code
MTR
maint_asana_section
Woodshop
maint_ref
recncmSAEQyGUmqpX
maint_freq_days
30
maint_task
Inspect and Clean Wood Miter Saw Blade
maint_level
tech_ready

Clean Miter Saw

Maintenance - Tech Ready Miter Saw, Wood

Service manual: https://drive.google.com/file/d/16HFrtwBzy-s0uS8aojnePJ2yyeupkZX2/view?usp=drive_link Procedure Unplug before cleaning. The miter saw should be cleaned with vacuum or a dry rag as needed to keep free of dust. Yellow plastic panel on work sur...

tool_code
MTR
maint_asana_section
Woodshop
maint_ref
rece8sN2BWhyjEza4
maint_level
tech_ready
maint_freq_days
60
maint_task
Clean Miter Saw

Pedestal grinder - cycle the media separator

Maintenance - Tech Ready Pedestal Grinders, Metal

The external air filter is a gray box to the right of the pedestal grinders. Cycle the Filter Using your foot, press and release the gray lever on the right side of the filter a few times to knock loose fine particles from the filter

tool_code
SBG
maint_freq_days
7
maint_task
Pedestal grinder - cycle the media separator
maint_asana_section
General Metals
maint_ref
rec4vWdB546s82WtB
maint_level
tech_ready

Empty pedestal grinder media seperator

Maintenance - Tech Ready Pedestal Grinders, Metal

Empty the Media Seperator DrawerTo the right of the pedestal grinders is a big gray box that is the media separator.  There is a cabinet door on the bottom with retaining latches. Put on a dust mask and safety glasses Ensure the separator is off Check th...

tool_code
SBG
maint_freq_days
180
maint_task
Empty pedestal grinder media seperator
maint_asana_section
General Metals
maint_ref
recbDx9YHNCS7vrRt
maint_level
tech_ready

Powder Coating - Deep clean

Maintenance - Tech Ready Powder Coating Booth

Safety Wear a dust mask. (If you do not have your own, disposable masks are available in the custodial room.) Wear safety glasses. Clean the Filter Remove the fluffy filter off the wall of the booth, and the rigid filters from the rear of the machine...

tool_code
PDB
maint_level
tech_ready
maint_freq_days
365
maint_task
Powder Coating - Deep clean
maint_asana_section
Powder Coating & Sandblasting
maint_ref
recMP9xc410YukiYY