Advanced Search
Search Results
74 total results found
Powder Coating - Sweep and Check Hoses
Service manual: https://drive.google.com/file/d/1q-U4OK-cNpTElOdnf1WNjkKlD4l9B48k/view Safety Wear a dust mask. Wear safety glassess Clean the Booth Turn on the booth ventilation system Use a broom to sweep the walls, ceiling, and floor of the boot...
Lubricate door hinges
Lubricate Hinges Add a little bit of oil to the hinges of each of the doors of: The ED Office Conference Room Staff Room Design Classroom Class Supply Room Maintenance Room Custodial Room Bathrooms Front Door All three doors leading out of the stu...
Empty Shop Vacs & Clean Filters
Safety Wear a dust mask. (If you do not have your own, disposable masks are available in the custodial room.) Wear safety glasses. Empty Shop Vacs and Service Filters We have 11 shop vacs - two in precision metals (one for dry, one for wet), one at the...
Empty leak catcher in custodial room
In the Custodial Room (behind the Jewelry Area) there is a bucket labeled "Leak Catcher" under a water pipe on the left side of the room as you enter. If the bucket is more than half full, dump the water into the sink and return it to its position under the...
Dust sheet metals area
Safety Wear a dust mask. Wear safety glasses. Unplug all electrical equipment before cleaning. Task List With a dry cloth, wipe down all external surfaces of the sheet metal tools: shear slip roller finger brake shrinker/stretcher turret punch...
Dust and Sweep Woodshop Area
Safety Turn on the woodshop dust collection. Wear a dust mask. (If you do not have your own, disposable masks are available in the custodial room.) Wear hearing protection. (The dust collection is loud.) Task List For each woodshop tool: Use a sho...
Dust and Sweep Studio Area
For each tool in the studio: Use a shop vac or dust brush to remove dust from all visible surfaces. Sweep the floor of the studio. Dispose of any debris using the rolling trash cans.
Dust and Sweep Metals Area
Safety Wear a dust mask (if you do not have your own, disposable masks are available in the custodial room). Task List For each metal shop tool: Use a shop vac or dust brush to remove dust from all visible surfaces. Sweep the floors of the general ...
Dust and Sweep Jewelry Area
Task List Use a shop vac, dust brush, or water-dampened paper towel to remove dust from all visible surfaces. (Pay special attention to the central table and the L-shaped table with finishing tools.) Wipe down the interior of the flame cabinet with a water...
Dust and Sweep Forge Area
Safety Wear a dust mask. Wear safety glasses. Task List Do not dust the interior of the forges as improper cleaning may damage the refractory material. Use a shop vac or dust brush to remove dust from all visible surfaces, paying special attention ...
Deep clean coffee maker
Service manual: Google Drive / Local PDF: DeLonghi Coffee Maker -216990-1.pdfFollow the instructions on page 10 of the manual.
Clean wash tub and water fountain
Wash Sink and Water Fountain Remove and discard any debris from the sink. Wash both sections of the sink and the top surface of the water fountain with soapy water. If Barkeep's friend or other stainless steel cleaner is available, follow the directions...
Clean the water pitcher
Clean Out the Pitcher Remove the lid. Wash and dry the lid. Remove the top reservoir. Remove the filter from the top reservoir and discard. Wash and dry the top reservoir. Wash and dry the pitcher. Replace the Filter Observe the filter replacement ...
Clean Popcorn Maker
If the popcorn maker is already clean, you can just close out this task. Clean Out Popcorn Compartment Unplug the popcorn maker. Remove any stale popcorn already in the popcorn maker. Clean the Kettle Unplug the kettle. Lift the kettle up and out o...
Clean out overhead air filters in woodshop
Safety Wear eye protection. Wear a dust mask. Cleaning the Filters Do this when the woodshop is not actively in use. Carefully lower the two overhead air filters in the woodshop using the winches mounted to the wall. Vacuum out the filters and the ...
Clean front desk area and shelves
Task List Organize all hand tools. (Put similar tools close to each other and ensure power cables are nicely stowed.) Place any loose papers on the front desk in the desk organizer on the left hand side of the desk. Notify the #techs channel on Discord of ...
Clean Computer Lab and Conference Room
Materials For a disinfectant, you can use sanitizing spray (kept under the kitchen sink, with refills in the maintenance closet) Apply disinfectant, wait three minutes, then wipe with a clean cloth or paper towel. If we are out of disindectant, submit a pur...
Deep Clean Tormach CNC
Safety Wear a dust mask. (If you do not have your own, disposable masks are available in the custodial room.) Wear safety glasses. Wear hearing protection. Wear gloves when handling chips. Clean Tormach Vacuum out the ways and the chip tray using t...
Downdraft Table Monthly Maintenance
Service manual: https://drive.google.com/file/d/1t_Rllh8OS5fv1GuQ800Qa1ZzpGfTkGr9/view Safety Wear a dust mask. Wear hearing protection. Wear safety glasses. Clean Downdraft Table Clean and/or vacuum dust drawer. (Dust drawer located on front face,...
CNC router dust collector - check interface between filter and bag
Safety Wear a dust mask. (If you do not have your own, disposable masks are available in the custodial room.) Wear safety glasses. Check and clean interface Remove the top filter from the dust collector using the handle at the top. Visually inspect ...