Advanced Search
Search Results
72 total results found
Deep Clean Tormach CNC
*Safety*- Wear a dust mask. (If you do not have your own, disposable masks are available in the custodial room.)- Wear safety glasses.- Wear hearing protection.- Wear gloves when handling chips.*Clean Tormach*1. Vacuum out the ways and the chip tray using the ...
Test emergency lighting
*Test Emergency Lighting*Turn off breaker 13 in panel A. (This breaker powers the emergency lighting.) With the breaker off, confirm emergency lights are working in the following areas:- by the bathrooms- in the studio / front half of the building- in the wood...
Check horizontal bandsaw interior, clean if needed
Clean the Interior Open the side panel. Dredge out any buildup of chips, gunk, and other debris. Ensure the cutting fluid can make its way to the sight glass on the bottom right of the machine. If it's not visible, submit a maintenance request so a traine...
Oil slip roll rollers
Safety: Ensure the machine is turned off and unplugged before oiling the rollers. Oil the rollers Apply several drops of 3-in-1 oil (located in the maintenance cart) to the three large rollers of the slip roll. Most of the oil ports will be small holes tow...
Clean Tormach Coolant System
The coolant system on the tormach has a tank and a filter screen on it - these should be inspected and cleaned regularly so the coolant can properly flow.*Gather Materials*- 2 Buckets, can be found past the Tormach. One 5 gallon and one smaller bucket that has...
Purge the scrap bins
* Woodshop* In the woodshop free bin and the free board caddy in the lathe area, remove any wood that: - Is painted or treated- Has nails/metal inside- Is heavily splintered- Is "swiss-cheesed" with little material to use, etc. *Metalshop* In the metalshop...
Dust sheet metals area
*Safety* - Wear a dust mask.- Wear safety glasses.- Unplug all electrical equipment before cleaning. *Task List* With a dry cloth, wipe down all external surfaces of the sheet metal tools: - shear- slip roller- finger brake- shrinker/stretcher- turret pun...
Magnet roller the parking lot
Sharp metal debris can accumulate in our parking lot - this poses a hazard to car tires, so it's important to periodically pick up metallic sharp objects using our magnet roller. Retrieve the magnet roller, usually located near the recycling bin by the forg...
Monthly Maintenance
Perform weekly maintenance Remove the lower panel on the infeed side of the machine. Vacuum dust buildup from inside cabinet and off motor. Check v-belts for damage, tension, and wear. Yellow/Red tag the machine if issues are observed. Check for problema...
Inspect and Clean Wood Miter Saw Blade
Service manual: PENDING*Inspect the Blade*Inspect the saw blade for wear and damage.1. If any teeth are missing, yellow tag the tool in a tool report and file a purchase request if there are no spares in the maintenance room.1. If two consecutive teeth are mis...
Clean Computer Lab and Conference Room
*Materials*For a disinfectant, you can use sanitizing spray (kept under the kitchen sink, with refills in the maintenance closet)Apply disinfectant, wait three minutes, then wipe with a clean cloth or paper towel.If we are out of disindectant, submit a purchas...
Verify tool tags (physical & digital)
*Compare Online and Physical Tool States*1. Open https://api.protohaven.org/techs 2. Make a note of tools in a yellow or red state.3. Visit each of the tools listed as red or yellow state and verify that there is a physical tag on the tool that matches that st...
CNC Plasma 14 Day Maintenance
Test the PH of the water Locate the PH test strips, in the computer cubby hole at the CNC Plasma Computer station. Use a stick or other object to lightly stir the water in the table. Just lightly move the water in between the slats, careful not to splash...
Check First Aid Kits for low levels of supply
Check the inventory for the first aid kits. Restock any low supplies; backstock is stored in Custodial. Submit purchase requests if anything is needed - especially bandages as they disappear quickly. There are three first aid kits - one each in the Kitchen, W...
Clean welding helmets and jackets
*Gloves*Inspect gloves. Put in a purchase request for any pairs that have holes or excessive wear (don't throw them out until we have replacements) - Purchase request: https://protohaven.org/purchasing*Helmets* 1. Make a purchase request if the helmet is nonfu...
Mail/Package Receiving Shelf
Place a post it note or tape a slip of paper with the current date on all of packages that are on the shelf. Look for older packages that have been there for a week or more and move them to the lost/found shelf in Camden's office. Important: Email Camden...
Empty Sandblast media separator
"Empty the Media Separator Drawer Behind the Plasma table is a square gray machine that is the media separator for the sand blaster. There is a drawer on the bottom with two retaining latches. Put on a dust mask and safety glasses Ensure the sandblaster...
Clean Popcorn Maker
If the popcorn maker is already clean, you can just close out this task. *Clean Out Popcorn Compartment*1. Unplug the popcorn maker.1. Remove any stale popcorn already in the popcorn maker. *Clean the Kettle* 1. Unplug the kettle.2. Lift the kettle up and o...
Clean Miter Saw
Service manual: https://drive.google.com/file/d/16HFrtwBzy-s0uS8aojnePJ2yyeupkZX2/view?usp=drive_link Unplug before cleaning. The miter saw should be cleaned with vacuum or a dry rag as needed to keep free of dust. Yellow plastic panel on work surface shoul...
Check Keybox Battery
Enter the password followed by # and ensure the light on the front of the box is green (i.e. good battery). If you see any other color, replace the batteries (4x AA). The password is present in Vaultwarden - accessible via the Chrome browser extension on the ...