# Resources

*Where to obtain materials, consumables, and tooling.*

<div class="section_highlight_wrapper" id="bkmrk-read-pages-22-28-of-"><div class="level1">- <div class="li">Read Pages 22-28 of the manual There is some good stuff in there.</div>
- <div class="li">Youtube has tons of great info. I've learned tons from Kent at [https://turnawoodbowl.com](https://turnawoodbowl.com).</div>
- The STEP file for the 3d printed light rings: [Light Ring.step](https://wiki.protohaven.org/attachments/316)

</div></div>Glossary: www.woodturnersresource.com/extras/lathe\_terms/lathe\_terms.html

Why you don’t use a Spindle Roughing Gouge on bowls: [www.youtube.com/watch?v=IOhHeyoZLaY](http://www.youtube.com/watch?v=IOhHeyoZLaY)

Understanding Woodturning Catches: [www.youtube.com/watch?v=jOvF5f1phhY](http://www.youtube.com/watch?v=jOvF5f1phhY)

Jimmy Clewes Turns a Square Oriental Box: [www.youtube.com/watch?v=Vmz5BKXBGLA](http://www.youtube.com/watch?v=Vmz5BKXBGLA)

Other Info:

Turning basics: [https://www.youtube.com/watch?v=SFs\_JmDtCUc](https://www.youtube.com/watch?v=SFs_JmDtCUc) (Transcript: [https://www.thesprucecrafts.com/learn-the-basics-of-woodturning-3536931](https://www.thesprucecrafts.com/learn-the-basics-of-woodturning-3536931))

Offset turning: [https://www.pbs.org/video/the-woodwrights-shop-offset-turning/](https://www.pbs.org/video/the-woodwrights-shop-offset-turning/)

Using the woodworm: [https://www.youtube.com/watch?v=EI-utYAfXJI](https://www.youtube.com/watch?v=EI-utYAfXJI)

Mounting bowls with the chuck and the faceplate: [https://www.youtube.com/watch?v=5KHkkws9lWA](https://www.youtube.com/watch?v=5KHkkws9lWA)