# Filament Dryer

#### The filament dryer can be used to remove moisture from you filament to produce better prints. 

- Maximum temperature of dryer is 90ºC
- Temperature can vary +/- 5ºC but tends to run hotter
- Rotate button should be pressed to increase airflow
- Suggested drying temperatures and times are in the chart below
- Check with your filament manufacturer for specific recommendations for drying.

[![Recommended drying times.png](https://wiki.protohaven.org/uploads/images/gallery/2026-09/scaled-1680-/recommended-drying-times.png)](https://wiki.protohaven.org/uploads/images/gallery/2026-09/recommended-drying-times.png)