Digital Microscope Tool Tutorial

A digital microscope, like a standard microscope, makes it easier to inspect small objects. This is very useful for precision work in textiles, electronics, jewelry, machining, and elsewhere.  

 Our digital microscope includes a built-in display and can take pictures and video as you work! 

 

 

 Power Button - press and hold to turn the device on or off 

 Menu Key - use this to switch between observation mode, resolution page, settings, page, and deletion page 

 OK button - takes a picture when short-pressed in observation mode,

 

 You can also long press to enter "Camera" mode; in this mode, short pressing will start and stop video recording. 

 

 

  Left and right click - use these to zoom in and out in observation mode, or navigate menus in other modes.

 

 Long press the left click to "integrate" i.e. reset the zoom. 

 

 

 Light Adjustment Knob - use this to adjust the light brightness 

 Locking Knob A/B - use these to adjust the height and position of the microscope on the stand. 

 Focus ring - use this to adjust the microscope focus 

 

 Troubleshooting 

 

 

 

 Problem 

 Solution 

 

 

 Device frozen 

 Press the "reset hole" with a fine needle or pin to force a shutdown 

 

 

 Blurry image 

 Rotate the focus ring until the image clears 

 

 

 

 Special Setups 

 PC Connection 

 Connect a USB cable between a computer's USB port and the charging port on the microscope to allow direct transfer of data to a PC. For Windows computers, the manufacturer recommends downloading and installing a custom application from this zip file: camera.zip