Electronics - Digital Microscope WKR Model 367 Digital Microscope Manual(s) Manuals and other reference materials from the manufacturer or other sources. Amazon link WKR367 digital microscope.pdf Member Notes Resources Where to obtain materials, consumables, and tooling.   Software per the guide :  AMCAP for windows 7/8 systems Windows Camera for windows 10 systems Smart camera application from http://www.inskam.com/download/camera.zip - stored on wiki at camera.zip Digital Microscope Tool Tutorial A digital microscope, like a standard microscope, makes it easier to inspect small objects. This is very useful for precision work in textiles, electronics, jewelry, machining, and elsewhere.  Our digital microscope includes a built-in display and can take pictures and video as you work! Power Button - press and hold to turn the device on or off Menu Key - use this to switch between observation mode, resolution page, settings, page, and deletion page OK button - takes a picture when short-pressed in observation mode, You can also long press to enter "Camera" mode; in this mode, short pressing will start and stop video recording.  Left and right click - use these to zoom in and out in observation mode, or navigate menus in other modes. Long press the left click to "integrate" i.e. reset the zoom. Light Adjustment Knob - use this to adjust the light brightness Locking Knob A/B - use these to adjust the height and position of the microscope on the stand. Focus ring - use this to adjust the microscope focus Troubleshooting Problem Solution Device frozen Press the "reset hole" with a fine needle or pin to force a shutdown Blurry image Rotate the focus ring until the image clears Special Setups PC Connection Connect a USB cable between a computer's USB port and the charging port on the microscope to allow direct transfer of data to a PC. For Windows computers, the manufacturer recommends downloading and installing a custom application from this zip file: camera.zip