Miter Saw, Wood

Clean Miter Saw
Service manual: https://drive.google.com/file/d/16HFrtwBzy-s0uS8aojnePJ2yyeupkZX2/view?usp=drive_link 

 Procedure 

 Unplug before cleaning. 

 The miter saw should be cleaned with vacuum or a dry rag as needed to keep free of dust. Yellow plastic panel on work surface should be removed if there is saw dust build or debris up underneath.  

 Check the sliding rails, if there is resistance, use dry teflon lube. 

Inspect and Clean Wood Miter Saw Blade
Service manual: PENDING 

 Inspect the Blade 

 Inspect the saw blade for wear and damage. 

 

 If any teeth are missing, yellow tag the tool in a tool report and file a purchase request if there are no spares in the maintenance room. 

 If two consecutive teeth are missing, file a tool report, replace the blade and place a purchase request if the last has been used. 

 

 Purchase request: https://protohaven.org/purchasing 

 Clean the Blade 

 Materials Needed: 

 

 Dish soap 

 Blade-Cleaning Kit (Found in the Maintenance Room) 

 Drivers: T-30 Star and 7/32 Hex from the maintenance cart 

 

 The blade-cleaning kit should contain: 

 

 A bin (for soaking) 

 A brush 

 Oily rags 

 Hand towels 

 

 Procedure 

 

 Unplug the saw. 

 Remove the saw blade. 

 Soak the blade in the cleaning solution for a few minutes, or apply cleaning solution with a sprayer. 

 Scrub both sides with a plastic or brass bristle brush (not steel/stainless). 

 Rinse throughly clean with water. 

 Dry blade completely. 

 Oil the entire surface very lightly with general purpose oil. 

 Install the saw blade. 

 Plug the machine back in.