# Jointer



# Jointer Maintenance - Monthly

### Task List

- <span data-sheets-root="1" style="font-size: 10pt; font-family: Arial; font-style: normal;">Clean the machine with a shop vac and dry cloth.</span>
- <span data-sheets-root="1" style="font-size: 10pt; font-family: Arial; font-style: normal;">Remove the dust collection buy pulling it away from the machine</span>
- <span data-sheets-root="1" style="font-size: 10pt; font-family: Arial; font-style: normal;">Inspect up inside the dust chute and make sure it is clear of buildup. </span>
- <span data-sheets-root="1" style="font-size: 10pt; font-family: Arial; font-style: normal;"> Wax the cast iron surface of the table with a paste wax. </span>
- <span data-sheets-root="1" style="font-size: 10pt; font-family: Arial; font-style: normal;">Generally inspect the machine for damage and loose or warn parts. If any damage is found, submit a tool report.</span>

<span data-sheets-root="1" style="font-size: 10pt; font-family: Arial; font-style: normal;">Tool report: https://airtable.com/appbIlORlmbIxNU1L/shrluff2WSzy8c3xd  
</span>

# Jointer Maintenance - Weekly

Service manual: [https://drive.google.com/file/d/1x37\_ONdS5rXLuT0\_jYOhp-QEAz2ClziH/view?usp=drive\_link](https://drive.google.com/file/d/1x37_ONdS5rXLuT0_jYOhp-QEAz2ClziH/view?usp=drive_link)

### Task List

1. Unplug the machine
2. Clean the cutter head.
3. Check cutter teeth for chips and dullness and file a tool report if needed - DO NOT ROTATE THE INSERTS
4. Generally inspect the machine for damage and loose or warn parts.
5. Check the dust extraction for blockages and any large bits that could cause blockages.